On Thu, Mar 10, 2022 at 5:48 PM Sa, Nuno <Nuno.Sa@xxxxxxxxxx> wrote:
>
> Hi Steve,
>
> > From: Steve Lee <steve.lee.analog@xxxxxxxxx>
> > Sent: Thursday, March 10, 2022 9:16 AM
> > To: lgirdwood@xxxxxxxxx; broonie@xxxxxxxxxx; perex@xxxxxxxx;
> > tiwai@xxxxxxxx; ckeepax@xxxxxxxxxxxxxxxxxxxxx; geert@linux-
> > m68k.org; rf@xxxxxxxxxxxxxxxxxxxxxxxxxxx; shumingf@xxxxxxxxxxx;
> > srinivas.kandagatla@xxxxxxxxxx; krzk@xxxxxxxxxx; dmurphy@xxxxxx;
> > jack.yu@xxxxxxxxxxx; Sa, Nuno <Nuno.Sa@xxxxxxxxxx>;
> > steves.lee@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> > alsa-devel@xxxxxxxxxxxxxxxx
> > Cc: Steve Lee <steve.lee.analog@xxxxxxxxx>
> > Subject: [PATCH] ASoC: max98390: Add reset gpio control
> >
> > [External]
> >
> > Add reset gpio control to support RESET PIN connected to gpio.
> >
> > Signed-off-by: Steve Lee <steve.lee.analog@xxxxxxxxx>
> > ---
> > sound/soc/codecs/max98390.c | 18 ++++++++++++++++++
> > sound/soc/codecs/max98390.h | 1 +
> > 2 files changed, 19 insertions(+)
> >
> > diff --git a/sound/soc/codecs/max98390.c
> > b/sound/soc/codecs/max98390.c
> > index b392567c2b3e..574d8d5f1119 100644
> > --- a/sound/soc/codecs/max98390.c
> > +++ b/sound/soc/codecs/max98390.c
> > @@ -1073,6 +1073,24 @@ static int max98390_i2c_probe(struct
> > i2c_client *i2c,
> > return ret;
> > }
> >
> > + max98390->reset_gpio = of_get_named_gpio(i2c-
> > >dev.of_node,
> > + "maxim,reset-gpios", 0);
>
> Why not using devm_gpiod_get_optional()? We could request the pin
> already in the asserted state and make the code slightly better...
>
> /* I guess there's no need to save it in our struct as we only use it here? */
> struct gpio_desc *reset_gpio;
>
> reset_gpio = devm_gpiod_get_optional(&i2c->dev, "reset", GPIOD_OUT_HIGH);
> if (reset_gpio) {
> usleep_range(1000, 2000);
> /* bring out of reset */
> gpio_direction_output(max98390->reset_gpio, 0);
> usleep_range(1000, 2000);
> }
>
> Also, do we have this on the bindings doc? If not, it should be done on a second
> patch on this series...
>
> - Nuno Sá
>
Thanks for comment on this patch. I will check and update as commented.
