On Fri, 2022-02-18 at 15:54 +0100, AngeloGioacchino Del Regno wrote:
> Il 17/02/22 14:42, Jiaxin Yu ha scritto:
> > This patch adds support for mt8186 board with mt6366, da7219 and
> > max98357.
> >
> > Signed-off-by: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
> > ---
> > .../mt8186/mt8186-mt6366-da7219-max98357.c | 910
> > ++++++++++++++++++
> > 1 file changed, 910 insertions(+)
> > create mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-
> > da7219-max98357.c
> >
> > diff --git a/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-
> > max98357.c b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-
> > max98357.c
> > new file mode 100644
> > index 000000000000..6ba53b8d1e46
> > --- /dev/null
> > +++ b/sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
> > @@ -0,0 +1,910 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +//
> > +// mt8186-mt6366-da7219-max98357.c
> > +// -- MT8186-MT6366-DA7219-MAX98357 ALSA SoC machine driver
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
> > +//
> > +
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/pm_runtime.h>
> > +#include <sound/pcm_params.h>
> > +#include <sound/soc.h>
> > +
> > +#include "../../codecs/da7219-aad.h"
> > +#include "../../codecs/da7219.h"
> > +#include "../../codecs/mt6358.h"
> > +#include "../common/mtk-afe-platform-driver.h"
> > +#include "mt8186-afe-common.h"
> > +#include "mt8186-afe-clk.h"
> > +#include "mt8186-afe-gpio.h"
> > +
> > +#define DA7219_CODEC_DAI "da7219-hifi"
> > +#define DA7219_DEV_NAME "da7219.5-001a"
> > +
> > +struct mt8186_mt6366_da7219_max98357_priv {
> > + struct snd_soc_jack headset_jack, hdmi_jack;
> > +};
> > +
> > +static struct snd_soc_codec_conf mt6366_codec_conf[] = {
> > + {
> > + .dlc = COMP_CODEC_CONF("mt6358-sound"),
> > + .name_prefix = "Mt6366",
> > + },
> > +};
> > +
> > +static int mt8186_da7219_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct mt8186_mt6366_da7219_max98357_priv *priv =
> > + snd_soc_card_get_drvdata(rtd->card);
> > + struct snd_soc_jack *jack = &priv->headset_jack;
> > + struct snd_soc_component *cmpnt_codec =
> > + asoc_rtd_to_codec(rtd, 0)->component;
> > + int ret;
> > +
> > + /* Enable Headset and 4 Buttons Jack detection */
> > + ret = snd_soc_card_jack_new(rtd->card, "Headset Jack",
> > + SND_JACK_HEADSET | SND_JACK_BTN_0 |
> > + SND_JACK_BTN_1 | SND_JACK_BTN_2 |
> > + SND_JACK_BTN_3 | SND_JACK_LINEOUT,
> > + jack, NULL, 0);
> > + if (ret) {
> > + dev_err(rtd->dev, "Headset Jack creation failed: %d\n",
> > ret);
> > + return ret;
> > + }
> > +
> > + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> > + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOLUMEUP);
> > + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEDOWN);
> > + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOICECOMMAND);
> > +
> > + da7219_aad_jack_det(cmpnt_codec, &priv->headset_jack);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt8186_da7219_i2s_hw_params(struct snd_pcm_substream
> > *substream,
> > + struct snd_pcm_hw_params
> > *params)
> > +{
> > + struct snd_soc_pcm_runtime *rtd =
> > asoc_substream_to_rtd(substream);
> > + struct snd_soc_dai *codec_dai;
> > + unsigned int rate = params_rate(params);
> > + unsigned int mclk_fs_ratio = 256;
> > + unsigned int mclk_fs = rate * mclk_fs_ratio;
> > + unsigned int freq;
> > + int ret = 0, j;
> > +
> > + ret = snd_soc_dai_set_sysclk(asoc_rtd_to_cpu(rtd, 0), 0,
> > + mclk_fs, SND_SOC_CLOCK_OUT);
> > + if (ret < 0)
> > + dev_err(rtd->dev, "failed to set cpu dai sysclk\n");
>
> Does it really make sense to go on after this failure?
>
> > +
> > + for_each_rtd_codec_dais(rtd, j, codec_dai) {
> > + if (!strcmp(codec_dai->component->name,
> > DA7219_DEV_NAME)) {
> > + ret = snd_soc_dai_set_sysclk(codec_dai,
> > + DA7219_CLKSRC_MCLK
> > ,
> > + mclk_fs,
> > + SND_SOC_CLOCK_IN);
> > + if (ret < 0)
> > + dev_err(rtd->dev, "failed to set
> > sysclk\n");
> > +
>
> I think that going on past this wouldn't make sense as well, as it
> may result
> in unexpected behavior... just return a failure here
Yes, it is.
>
> > + if ((rate % 8000) == 0)
> > + freq = DA7219_PLL_FREQ_OUT_98304;
> > + else
> > + freq = DA7219_PLL_FREQ_OUT_90316;
> > +
> > + ret = snd_soc_dai_set_pll(codec_dai, 0,
> > + DA7219_SYSCLK_PLL_SRM
> > ,
> > + 0, freq);
> > + if (ret)
> > + dev_err(rtd->dev, "failed to start PLL:
> > %d\n",
> > + ret);
>
> and here
Yes, you are right.
>
> > + }
> > + }
> > +
>
> So, you've covered all failure cases already, for which, you can
> simply
> return 0 here.
Yes, it is.
>
> > + return ret;
> > +}
> > +
> > +static int mt8186_da7219_i2s_hw_free(struct snd_pcm_substream
> > *substream)
> > +{
> > + struct snd_soc_pcm_runtime *rtd =
> > asoc_substream_to_rtd(substream);
> > + struct snd_soc_dai *codec_dai;
> > + int ret = 0, j;
> > +
> > + for_each_rtd_codec_dais(rtd, j, codec_dai) {
> > + if (!strcmp(codec_dai->component->name,
> > DA7219_DEV_NAME)) {
> > + ret = snd_soc_dai_set_pll(codec_dai,
> > + 0,
> > DA7219_SYSCLK_MCLK, 0, 0);
> > + if (ret < 0) {
> > + dev_err(rtd->dev, "failed to stop PLL:
> > %d\n",
> > + ret);
> > + break;
> > + }
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const struct snd_soc_ops mt8186_da7219_i2s_ops = {
> > + .hw_params = mt8186_da7219_i2s_hw_params,
> > + .hw_free = mt8186_da7219_i2s_hw_free,
> > +};
> > +
> > +static int mt8186_mt6366_hdmi_init(struct snd_soc_pcm_runtime
> > *rtd)
> > +{
> > + struct snd_soc_component *cmpnt_codec =
> > + asoc_rtd_to_codec(rtd, 0)->component;
> > + struct mt8186_mt6366_da7219_max98357_priv *priv =
> > + snd_soc_card_get_drvdata(rtd->card);
> > + int ret;
> > +
> > + ret = snd_soc_card_jack_new(rtd->card, "HDMI Jack",
> > SND_JACK_LINEOUT,
> > + &priv->hdmi_jack, NULL, 0);
> > + if (ret) {
> > + dev_err(rtd->dev, "HDMI Jack creation failed: %d\n",
> > ret);
> > + return ret;
> > + }
> > +
> > + return snd_soc_component_set_jack(cmpnt_codec, &priv-
> > >hdmi_jack, NULL);
> > +}
> > +
> > +static int mt8186_mt6366_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_component *cmpnt_afe =
> > + snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
> > + struct snd_soc_component *cmpnt_codec =
> > + asoc_rtd_to_codec(rtd, 0)->component;
> > + struct mtk_base_afe *afe =
> > snd_soc_component_get_drvdata(cmpnt_afe);
> > + struct mt8186_afe_private *afe_priv = afe->platform_priv;
> > + struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
> > + int ret;
> > +
> > + /* set mtkaif protocol */
> > + mt6358_set_mtkaif_protocol(cmpnt_codec,
> > + MT6358_MTKAIF_PROTOCOL_1);
> > + afe_priv->mtkaif_protocol = MT6358_MTKAIF_PROTOCOL_1;
> > +
> > + ret = snd_soc_dapm_sync(dapm);
> > + if (ret) {
> > + dev_info(rtd->dev, "failed to snd_soc_dapm_sync\n");
>
> dev_err()
>
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int mt8186_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
> > *rtd,
> > + struct snd_pcm_hw_params *params)
> > +{
> > + struct snd_interval *channels = hw_param_interval(params,
> > + SNDRV_PCM_HW_PARAM_CHANNELS);
> > + dev_info(rtd->dev, "%s(), fix format to 32bit\n", __func__);
> > +
>
> dev_dbg()
>
> > + /* fix BE i2s channel to 2 channel */
> > + channels->min = 2;
> > + channels->max = 2;
> > +
> > + /* fix BE i2s format to S32_LE, clean param mask first */
> > + snd_mask_reset_range(hw_param_mask(params,
> > SNDRV_PCM_HW_PARAM_FORMAT),
> > + 0, (__force unsigned
> > int)SNDRV_PCM_FORMAT_LAST);
> > +
> > + params_set_format(params, SNDRV_PCM_FORMAT_S32_LE);
> > +
> > + return 0;
> > +}
> > +
> > +static int mt8186_hdmi_i2s_hw_params_fixup(struct
> > snd_soc_pcm_runtime *rtd,
> > + struct snd_pcm_hw_params
> > *params)
> > +{
> > + struct snd_interval *channels = hw_param_interval(params,
> > + SNDRV_PCM_HW_PARAM_CHANNELS);
> > + dev_info(rtd->dev, "%s(), fix format to 32bit\n", __func__);
> > +
>
> dev_dbg()
>
> > + /* fix BE i2s channel to 2 channel */
> > + channels->min = 2;
> > + channels->max = 2;
> > +
> > + /* fix BE i2s format to S24_LE, clean param mask first */
> > + snd_mask_reset_range(hw_param_mask(params,
> > SNDRV_PCM_HW_PARAM_FORMAT),
> > + 0, (__force unsigned
> > int)SNDRV_PCM_FORMAT_LAST);
> > +
> > + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
> > +
> > + return 0;
> > +}
>
Ok, I will use this code which is really more concise.
> Besides, I would do the following instead:
>
> static int mt8186_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
>
> struct snd_pcm_hw_params *params,
>
> snd_pcm_format_t fmt)
>
> {
>
> struct snd_interval *channels = hw_param_interval(params,
>
> SNDRV_PCM_HW_PARAM_CHANNELS);
>
> dev_dbg(rtd->dev, "%s(), fix format to 32bit\n", __func__);
>
>
>
> /* fix BE i2s channel to 2 channel */
>
> channels->min = 2;
>
> channels->max = 2;
>
>
>
> /* fix BE i2s format to S32_LE, clean param mask first */
>
> snd_mask_reset_range(hw_param_mask(params,
> SNDRV_PCM_HW_PARAM_FORMAT),
>
> 0, (__force unsigned
> int)SNDRV_PCM_FORMAT_LAST);
>
>
>
> params_set_format(params, fmt);
>
>
>
> return 0;
>
> }
>
>
>
> static int mt8186_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
> *rtd,
>
> struct snd_pcm_hw_params *params)
>
> {
>
> return mt8186_hw_params_fixup(rtd, params,
> SNDRV_PCM_FORMAT_S32_LE);
>
> }
>
>
>
> static int mt8186_hdmi_i2s_hw_params_fixup(struct snd_soc_pcm_runtime
> *rtd,
>
> struct snd_pcm_hw_params
> *params)
>
> {
>
> return mt8186_hw_params_fixup(rtd, params,
> SNDRV_PCM_FORMAT_S24_LE);
>
> }
>
> ... this reduces code duplication!
>
> > +
> > +/* FE */
> > +SND_SOC_DAILINK_DEFS(playback1,
> > + DAILINK_COMP_ARRAY(COMP_CPU("DL1")),
> > + DAILINK_COMP_ARRAY(COMP_DUMMY()),
> > + DAILINK_COMP_ARRAY(COMP_EMPTY()));
>
>
> ..snip..
>
> > +static int mt8186_mt6366_da7219_max98357_dev_probe(struct
> > platform_device *pdev)
> > +{
> > + struct snd_soc_card *card =
> > &mt8186_mt6366_da7219_max98357_soc_card;
> > + struct snd_soc_dai_link *dai_link;
> > + struct mt8186_mt6366_da7219_max98357_priv *priv;
> > + struct device_node *platform_node, *hdmi_codec;
> > + int ret, i;
> > +
> > + dev_info(&pdev->dev, "%s(), ++\n", __func__);
> > +
> > + card->dev = &pdev->dev;
> > +
> > + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + platform_node = of_parse_phandle(pdev->dev.of_node,
> > + "mediatek,platform", 0);
> > + if (!platform_node) {
> > + dev_info(&pdev->dev,
> > + "Property 'platform' missing or invalid\n");
>
> if (!platform_node)
> return dev_err_probe(&pdev->dev, -EINVAL,
> "mediatek,platform missing or
> invalid\n");
>
> > + return -EINVAL;
got err_platform_node;
> > + }
> > +
> > + hdmi_codec = of_parse_phandle(pdev->dev.of_node,
> > + "mediatek,hdmi-codec", 0);
> > + if (!hdmi_codec) {
> > + dev_info(&pdev->dev,
> > + "Property 'hdmi' missing or invalid\n");
>
> dev_err()
>
> > + return -EINVAL;
> > + }
Should I of_node_put(platform_node) befor return?
goto err_hdmi_node;
> > +
> > + for_each_card_prelinks(card, i, dai_link) {
> > + if (dai_link->platforms->name)
> > + continue;
> > +
> > + if (hdmi_codec && strcmp(dai_link->name, "I2S3") == 0)
> > {
> > + dai_link->codecs->of_node = hdmi_codec;
> > + dai_link->ignore = 0;
> > + }
> > +
> > + dai_link->platforms->of_node = platform_node;
> > + }
> > +
> > + snd_soc_card_set_drvdata(card, priv);
> > +
> > + /* init gpio */
> > + ret = mt8186_afe_gpio_init(&pdev->dev);
> > + if (ret)
> > + dev_info(&pdev->dev, "init gpio error\n");
>
> dev_err() and goto end;
Yes, goto err_init_gpio and of_node_put for hdmi_codec and
platform_node.
>
> > +
> > + dev_info(&pdev->dev, "%s(), devm_snd_soc_register_card\n",
> > __func__);
> > + ret = devm_snd_soc_register_card(&pdev->dev, card);
> > + if (ret)
> > + dev_info(&pdev->dev, "%s snd_soc_register_card fail
> > %d\n",
> > + __func__, ret);
>
> dev_err_probe()
>
> end:
>
err_init_gpio:
> > + of_node_put(hdmi_codec);
err_hdmi_node:
> > + of_node_put(platform_node);
> > +
err_platform_node:
> > + return ret;
> > +}
> > +
> > +#if IS_ENABLED(CONFIG_OF)
> > +static const struct of_device_id
> > mt8186_mt6366_da7219_max98357_dt_match[] = {
> > + {.compatible =
> > "mediatek,mt8186_mt6366_da7219_max98357_sound",},
> > + {}
> > +};
> > +#endif
> > +
> > +static struct platform_driver mt8186_mt6366_da7219_max98357_driver
> > = {
> > + .driver = {
> > + .name = "mt8186_mt6366_da7219_max98357",
> > +#if IS_ENABLED(CONFIG_OF)
> > + .of_match_table =
> > mt8186_mt6366_da7219_max98357_dt_match,
> > +#endif
> > + .pm = &snd_soc_pm_ops,
> > + },
> > + .probe = mt8186_mt6366_da7219_max98357_dev_probe,
> > +};
> > +
> > +module_platform_driver(mt8186_mt6366_da7219_max98357_driver);
> > +
> > +/* Module information */
> > +MODULE_DESCRIPTION("MT8186-MT6366-DA7219-MAX98357 ALSA SoC machine
> > driver");
> > +MODULE_AUTHOR("Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("mt8186_mt6366_da7219_max98357 soc card");
>
>
