A continuation of cleanup work of Intel SST solutions found in sound/soc/intel/. With two major chapters released last year catpt [1] and removal of haswell solution [2], time has come for Skylake-driver. Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied and even attempts of refactors as seen in fundamental overhaul [3], IPC flow adjustments [4] and LARGE_CONFIG overhaul [5] series. Unfortunately, story repeats itself - problems are found within the core of a driver. Painting it with different colors does not change the fact that is it still a house of cards. As changes needed to address those issues would make Skylake solution incompatible with its previous revisions, a decision has been made to provide a new solution instead. In time it would deprecate and replace Skylake-driver. That solution has been called AVS - from AudioDSP architecture name: Audio-Voice-Speech. It is meant to provide support for the exact same range of platforms as its predecessor: SKL, KBL, AML and APL. Note: this series is dependent upon HDA-series [6] which exposes several codec-organization functions allowing for reduced code size on avs-driver side. Note: this series does not add fully functional driver as its size would get out of control. Here, focus is put on adding IPC protocol and code loading code. Changes v2 -> v3: - fixed variable initialization errors mentioned by sparse Changes v1 -> v2: Almost all updates here are thanks to feedback from Pierre. - several comments and few kernel-docs have been added in areas which felt more or less unclear - avs_ipc_wait_busy_completion() now spins up to 'repeats_left' number of times before giving up - 'adsp_ba' field of struct avs_dev has been renamed to 'dsp_ba' - 'dops' field of struct avs_spec has been renamed to 'dsp_ops' - IPC abstraction has been simplified: SKL_ADSP_REG_HIP* regs are used directly - fixed allnoconfig with AVS enabled compilation issues - fixed code loading error paths: previously requested firmware is now released before function return to the caller - code and function arguments tied to D0IX support have been removed from this patchset and will be part of followup series adding that feature instead - enriched dev_err() messages in avs_dsp_get_core() and avs_dsp_put_core() - numerous wording fixes used in power/reset/stall DSP operations Changes RFC v1 [7]: -> v1: - separated HDA codec-organization patches, path and topology handling, PCM and complementary features such as recovery from this series to ease the review process - fixed EXPORT_SYMBOL_GPL for exported members of ASoC framework - result of stall() is now checked when sending ROM message - result of snd_hdac_ext_stream_set_spib() is now checked when loading basefw - if basefw is not ready, notification processing is now skipped - documented several topology parsing helpers Changes [internal] RFC v2 -> [public] RFC v1: - dropped any sysfs related changes from this series, moved to follow up one - dropped entire subscription-mechanism found in ipc.c. Handlers that are delegated to service certain firmware notifications are now called directly - fixed kernel doc for snd_soc_dapm_new_dai_widgets() as reported by ikp - prefixed snd_hda_codec_device_init() as suggested by Amadeo - improved comments for d0ix transitions for APL-based platforms as suggested by Pierre - a ton of spelling related fixes in most of the commit messages - fixed remaining warnings pointed by scan-build (variable assigned but not used) - replaced most of 'cAVS X.Y' expression usages with 'platform-based' equivalents as suggested by Pierre e.g.: cAVS 1.5 -> SKL-based Changes [internal] RFC v1 -> [internal] RFC v2: - fixed memleak caused by lack of kfree(vols) if memory allocation fails in avs_peakvol_create() as reported by Curtis - fixed missing 'i' iterator incrementation in avs_widget_ready() causing reference loss as reported by Curtis - replace hardcode: 0x40 usage with snd_hdac_calc_stream_format as suggested by Curtis. In consequence, readability for all code loading (CL) procedues has increased and such approach auto-documents the CL stream preparation - updated behavior of all index-fetching functions found in utils.c: avs_module_entry_index(), avs_module_id_entry_index() and follow ups: avs_get_module_entry(), avs_get_module_id_entry() to better conform to linux-kernel standard when no entry is found (return -ENOENT) rather than C++ standard (return -1, what in kernel case translated to -EPERM) as suggested by Curtis and Peter - several suggestions have been made regarding spacing, and so far, I've agreed and applied with all of them. None proposed seemed out of place or redundant - avs_path_stop() renamed to avs_path_pause() pipeline states are represented by RESET/PAUSED/RUNNING. avs_path_reset() and avs_path_run() were already there and avs_path_stop() just didn't look cohesive - added missing parsers for num_output_pin and num_input_pin which are required for custom modules such as WAVES or DSM - dropped 'priv_param_length' from custom module descriptor as this field is obsolete in firmware - parse_dictionary() has been split into parse_dictionary_header() and parse_dictionary_entries() to drop code duplication present in several parsing function which could not re-use entire parse_dictionary() - added avs_tplg_vendor_array_lookup_next() and avs_tplg_vendor_entry_next() to drop code duplicated present in several parsing functions. This change greatly impacted readability of all parsers - parsing helpers such avs_tplg_vendor_array_lookup() now return offset by updating specified in function argument list u32 *offset variable. This is to address problem when u32 offset would be greater than max int, which is the return type for these functions - AVS_DEFINE_PTR_PARSER() macro has been introduced to drop code duplication for all ptr-parsing users - all struct avs_path_module creators have had their declaration updated: function argument *owner ceased to exist as it could already be accessed by mod->owner - fixed the order of operation for conditional paths (e.g.: echo reference) so these are no longer controlled by "source" path and instead are impacted by state changes of source and sink paths both. Previously only source path e.g. playback sourcing echo reference would trigger RUNNING status for conditional path. Equivalent RUNNING on WoV path which is in this case sink path, would not do so, leading to order-of-operation problems. Behavior has been changed to: both source and sink need to be RUNNING for conditional path to be set to RUNNING too. PAUSED for either source or sink will cause PAUSED transition for conditional path. - to achieve the above, path states are now saved in 'state' i.e. new u32 field for struct avs_path - resigned from fw_filename field usage in favour of newly added tplg_filename for machine board descriptors as suggested by Pierre - platform descriptor fields have had their names update better reflect their purpose as suggested by Pierre - fixed comp_list missing locking when manipulated - all message senders now accept request as pointer as suggeseted by Peter - resigned of AZX_ usage for all ADSP-related registers, leaving them only for HOST memory space related operations - fixed disable path for core DSP operations: power/reset/stall as reported by Peter - safety when locking between received responses (reply vs notification) has been lowered as suggested by Pierre. Most usages are not performed in IRQ context and none is done in hard-IRQ one - s/master/main/ plus AVS_MAIN_CORE_MASK has replaced ->master_mask - several functions have had their logging updated - logs have been moved to lower level functions as suggested by Pierre - hdac_ext_stream usage has been streamlined to estream, hdac_streams are represented by hstream instead - hw_params() are resilient to scenarios when they are called mutliple times as reported by Pierre - avs_dsp_enable() now collapses if any of its steps fails as reported by Pierre and Peter - avs_module_ida_empty() now returns value of type bool as suggested by Bard [1]: https://www.spinics.net/lists/alsa-devel/msg116440.html [2]: https://www.spinics.net/lists/alsa-devel/msg116901.html [3]: https://www.spinics.net/lists/alsa-devel/msg94199.html [4]: https://www.spinics.net/lists/alsa-devel/msg92588.html [5]: https://lore.kernel.org/all/20190808181549.12521-1-cezary.rojewski@xxxxxxxxx/ [6]: https://lore.kernel.org/alsa-devel/20220207114906.3759800-1-cezary.rojewski@xxxxxxxxx/T/#t [7]: https://lore.kernel.org/all/20211208111301.1817725-1-cezary.rojewski@xxxxxxxxx/ Cezary Rojewski (17): ALSA: hda: Add helper macros for DSP capable devices ASoC: Export DAI register and widget ctor and dctor functions ASoC: Intel: Introduce AVS driver ASoC: Intel: avs: Inter process communication ASoC: Intel: avs: Add code loading requests ASoC: Intel: avs: Add pipeline management requests ASoC: Intel: avs: Add module management requests ASoC: Intel: avs: Add power management requests ASoC: Intel: avs: Add ROM requests ASoC: Intel: avs: Add basefw runtime-parameter requests ASoC: Intel: avs: Firmware resources management utilities ASoC: Intel: avs: Declare module configuration types ASoC: Intel: avs: Dynamic firmware resources management ASoC: Intel: avs: General code loading flow ASoC: Intel: avs: Implement CLDMA transfer ASoC: Intel: avs: Code loading over CLDMA ASoC: Intel: avs: Code loading over HDA include/sound/hdaudio.h | 2 + include/sound/hdaudio_ext.h | 50 +++ include/sound/soc-dapm.h | 1 + sound/soc/intel/Kconfig | 12 + sound/soc/intel/Makefile | 1 + sound/soc/intel/avs/Makefile | 6 + sound/soc/intel/avs/avs.h | 248 +++++++++++ sound/soc/intel/avs/cldma.c | 317 ++++++++++++++ sound/soc/intel/avs/cldma.h | 29 ++ sound/soc/intel/avs/core.c | 62 +++ sound/soc/intel/avs/dsp.c | 303 +++++++++++++ sound/soc/intel/avs/ipc.c | 393 +++++++++++++++++ sound/soc/intel/avs/loader.c | 607 +++++++++++++++++++++++++ sound/soc/intel/avs/messages.c | 697 +++++++++++++++++++++++++++++ sound/soc/intel/avs/messages.h | 753 ++++++++++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 75 ++++ sound/soc/intel/avs/utils.c | 301 +++++++++++++ sound/soc/soc-core.c | 1 + sound/soc/soc-dapm.c | 15 + 19 files changed, 3873 insertions(+) create mode 100644 sound/soc/intel/avs/Makefile create mode 100644 sound/soc/intel/avs/avs.h create mode 100644 sound/soc/intel/avs/cldma.c create mode 100644 sound/soc/intel/avs/cldma.h create mode 100644 sound/soc/intel/avs/core.c create mode 100644 sound/soc/intel/avs/dsp.c create mode 100644 sound/soc/intel/avs/ipc.c create mode 100644 sound/soc/intel/avs/loader.c create mode 100644 sound/soc/intel/avs/messages.c create mode 100644 sound/soc/intel/avs/messages.h create mode 100644 sound/soc/intel/avs/registers.h create mode 100644 sound/soc/intel/avs/utils.c -- 2.25.1
