For SoundWire Frame sync to be generated correctly we need both MCLK
and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on,
however after adding pm runtime support its possible that NPl clock could be
turned off even when SoundWire controller is active.
Fix this by enabling mclk and npl clk when SoundWire clks are enabled.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
sound/soc/codecs/lpass-rx-macro.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/lpass-rx-macro.c b/sound/soc/codecs/lpass-rx-macro.c
index fb5d4bb8bd8b..9ce83cff3e1b 100644
--- a/sound/soc/codecs/lpass-rx-macro.c
+++ b/sound/soc/codecs/lpass-rx-macro.c
@@ -3428,6 +3428,7 @@ static int swclk_gate_enable(struct clk_hw *hw)
{
struct rx_macro *rx = to_rx_macro(hw);
+ clk_prepare_enable(rx->clks[2].clk);
rx_macro_mclk_enable(rx, true);
if (rx->reset_swr)
regmap_update_bits(rx->regmap, CDC_RX_CLK_RST_CTRL_SWR_CONTROL,
@@ -3453,6 +3454,7 @@ static void swclk_gate_disable(struct clk_hw *hw)
CDC_RX_SWR_CLK_EN_MASK, 0);
rx_macro_mclk_enable(rx, false);
+ clk_disable_unprepare(rx->clks[2].clk);
}
static int swclk_gate_is_enabled(struct clk_hw *hw)
@@ -3490,7 +3492,7 @@ static struct clk *rx_macro_register_mclk_output(struct rx_macro *rx)
struct clk_init_data init;
int ret;
- parent_clk_name = __clk_get_name(rx->clks[2].clk);
+ parent_clk_name = __clk_get_name(rx->clks[3].clk);
init.name = clk_name;
init.ops = &swclk_gate_ops;
--
2.21.0
