On Sat, Apr 19, 2008 at 02:41:03AM +0200, Daniel Mack wrote: > the registers in questions are purely in its scope. So the idea is to > set up the GPIO's functions via alsa controls and handle its events in > some board-related code as this is really not abstractable. One could, > however, do this setup in machine-related code within the asoc > environment. The usual approach is to have multi-function pins on CODECs are controlled by the ASoC codec driver based on configuration supplied by the machine driver. Their use tends to be heavily constrained by the board design so it usually makes more sense to let the machine driver set things up and deal with exposing controls for any configurability that user space can exercise. Most of the time when GPIO lines on CODECs are used they tend to be controlling other bits of the audio subsystem anyway (eg, power for simple amplifiers) - most SoCs have plenty of GPIOs on-board and they're usually much easier to work with due to being memory mapped on the CPU. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
