I did some more digging into the code to find out what goes boink.
For comparison I took my wife's desktop wich has a Cannon Lake chipset
as well along with a working a ALC892 AVS device.
It seems there is a codec mask issue selected in the chip->bus struct.
Inside the function
static int azx_probe_continue(struct azx *chip)
of hda_intel.c the bus->codec_mask on my wife's pc contains the integer
value "5" and both ALC892 and the HDMI is found. On my device it is "4"
and only the HDMI is found.
/* create codec instances */
if (bus->codec_mask) {
err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
if (err < 0)
goto out_free;
}
After forcing the falue before probing: "bus->codec_mask = 5;" the
ALC892 is finally detected on my system and I have sound! alsa-info
below: Please pardon the trash printk's in the log ;-)
http://alsa-project.org/db/?f=057aac1a0e9591de3847dca5ebc424dd65c8a221
I'll do some more digging into it next week but it would probably
save tons of time if someone could point me is the right direction
where to look further?
Gesendet: Mittwoch, 09. Februar 2022 um 17:47 Uhr
Von: dmummenschanz@xxxxxx
An: "Pierre-Louis Bossart" <pierre-louis.bossart@xxxxxxxxxxxxxxx>,
alsa-devel@xxxxxxxxxxxxxxxx
Betreff: Aw: Re: Re: Cannon Lake PCH cAVS (ALC892) not detected by
kernel driver
snd_intel_dspcfg: dsp_driver=1
was a leftover from testing. I' ve removed all parameters, add added
the debug options you've asked.
[1]http://alsa-project.org/db/?f=6e30e9f598bd2f03b2f5cff0df261f78719ea2
9d
Some googling reveals that others suffer from the same problen on the
same laptop as well. Some report that the device appears after pci-bus
rescanning however that did not work in my case so I agree there might
be an issue with probing the relatek device. Unfortunately I'm not a
kernel dev so I don't even know where to start looking however I'm
happy to investigate with your help.
Gesendet: Mittwoch, 09. Februar 2022 um 16:51 Uhr
Von: "Pierre-Louis Bossart" <pierre-louis.bossart@xxxxxxxxxxxxxxx>
An: dmummenschanz@xxxxxx, alsa-devel@xxxxxxxxxxxxxxxx
Betreff: Re: Aw: Re: Cannon Lake PCH cAVS (ALC892) not detected by
kernel driver
On 2/9/22 01:14, dmummenschanz@xxxxxx wrote:
> The information about the codec is based on the string windows
> provides:
>
>
HDAUDIO\FUNC_01&VEN_10EC&DEV_0892&SUBSYS_15580351&REV_1003\4&16AF2B56&&
> 0001
>
> Here is the alsa-info output for the 5.16 mainline kernel:
>
>
[1][2]http://alsa-project.org/db/?f=38c48cd24dc4ba9a9487dd96f857120cc9c
e43
67
The use of this option is not clear:
snd_intel_dspcfg: dsp_driver=1
This means you are trying to force the use of the legacy driver. is
this
intentional? Can you remove it and see what happens?
The results show you don't have a driver bound to the PCI device, so
likely something goes boink in the probe.
It wouldn't hurt to enable dynamic debug as well.
options snd_hda_intel dyndbg=+p
options snd_intel_dspcfg dyndbg=+p
References
1.
[3]http://alsa-project.org/db/?f=38c48cd24dc4ba9a9487dd96f857120cc9ce43
67
References
1. http://alsa-project.org/db/?f=6e30e9f598bd2f03b2f5cff0df261f78719ea29d
2. http://alsa-project.org/db/?f=38c48cd24dc4ba9a9487dd96f857120cc9ce43
3. http://alsa-project.org/db/?f=38c48cd24dc4ba9a9487dd96f857120cc9ce4367
