Am Mittwoch, dem 02.02.2022 um 16:45 +0000 schrieb Charles Keepax:
> When the DMIC_ENA bit is set the analogue inputs are disconnected
> from
> the digital core of the chip, in favour of the digital microphones.
> Currently the driver will always enable DMIC_ENA whilst the GPIOs are
> configured for the DMIC function, this means the user can't currently
> use both the analog inputs and the digital inputs in one system.
>
> Add an additional DAPM mutex that allows switching between analog and
> digital inputs into the digital core.
>
> Reported-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
Hi Charles, thank you again very much for this! You can make this
Reported-and-tested-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx>
> ---
> sound/soc/codecs/wm8962.c | 21 +++++++++++++++++----
> 1 file changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
> index a5584ba962dcf..2c41d31956aa8 100644
> --- a/sound/soc/codecs/wm8962.c
> +++ b/sound/soc/codecs/wm8962.c
> @@ -2049,6 +2049,13 @@ static SOC_ENUM_SINGLE_DECL(hpoutl_enum,
> static const struct snd_kcontrol_new hpoutl_mux =
> SOC_DAPM_ENUM("HPOUTL Mux", hpoutl_enum);
>
> +static const char * const input_mode_text[] = { "Analog", "Digital"
> };
> +
> +static SOC_ENUM_SINGLE_VIRT_DECL(input_mode_enum, input_mode_text);
> +
> +static const struct snd_kcontrol_new input_mode_mux =
> + SOC_DAPM_ENUM("Input Mode", input_mode_enum);
> +
> static const struct snd_kcontrol_new inpgal[] = {
> SOC_DAPM_SINGLE("IN1L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 3, 1,
> 0),
> SOC_DAPM_SINGLE("IN2L Switch", WM8962_LEFT_INPUT_PGA_CONTROL, 2, 1,
> 0),
> @@ -2147,6 +2154,9 @@ SND_SOC_DAPM_MIXER("MIXINR", WM8962_PWR_MGMT_1,
> 4, 0,
>
> SND_SOC_DAPM_AIF_IN("DMIC_ENA", NULL, 0, WM8962_PWR_MGMT_1, 10, 0),
>
> +SND_SOC_DAPM_MUX("Input Mode L", SND_SOC_NOPM, 0, 0,
> &input_mode_mux),
> +SND_SOC_DAPM_MUX("Input Mode R", SND_SOC_NOPM, 0, 0,
> &input_mode_mux),
> +
> SND_SOC_DAPM_ADC("ADCL", "Capture", WM8962_PWR_MGMT_1, 3, 0),
> SND_SOC_DAPM_ADC("ADCR", "Capture", WM8962_PWR_MGMT_1, 2, 0),
>
> @@ -2226,16 +2236,19 @@ static const struct snd_soc_dapm_route
> wm8962_intercon[] = {
>
> { "DMIC_ENA", NULL, "DMICDAT" },
>
> + { "Input Mode L", "Analog", "MIXINL" },
> + { "Input Mode L", "Digital", "DMIC_ENA" },
> + { "Input Mode R", "Analog", "MIXINR" },
> + { "Input Mode R", "Digital", "DMIC_ENA" },
> +
> { "ADCL", NULL, "SYSCLK" },
> { "ADCL", NULL, "TOCLK" },
> - { "ADCL", NULL, "MIXINL" },
> - { "ADCL", NULL, "DMIC_ENA" },
> + { "ADCL", NULL, "Input Mode L" },
> { "ADCL", NULL, "DSP2" },
>
> { "ADCR", NULL, "SYSCLK" },
> { "ADCR", NULL, "TOCLK" },
> - { "ADCR", NULL, "MIXINR" },
> - { "ADCR", NULL, "DMIC_ENA" },
> + { "ADCR", NULL, "Input Mode R" },
> { "ADCR", NULL, "DSP2" },
>
> { "STL", "Left", "ADCL" },
