There's no need to complicate examples with a platform specific macro.
It also complicates example parsing to figure out the number of interrupt
cells in examples (based on bracketing).
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
.../devicetree/bindings/sound/realtek,rt5682s.yaml | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
index d65c0ed5060c..ca5b8987b749 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5682s.yaml
@@ -21,6 +21,7 @@ properties:
description: I2C address of the device.
interrupts:
+ maxItems: 1
description: The CODEC's interrupt output.
realtek,dmic1-data-pin:
@@ -94,7 +95,7 @@ required:
examples:
- |
- #include <dt-bindings/gpio/tegra-gpio.h>
+ #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
@@ -104,10 +105,9 @@ examples:
codec@1a {
compatible = "realtek,rt5682s";
reg = <0x1a>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
realtek,ldo1-en-gpios =
- <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ <&gpio 2 GPIO_ACTIVE_HIGH>;
realtek,dmic1-data-pin = <1>;
realtek,dmic1-clk-pin = <1>;
realtek,jd-src = <1>;
--
2.32.0
