Re: [PATCH v5] ASoC: dt-bindings: davinci-mcasp: convert McASP bindings to yaml schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Javesh,

On 03/01/2022 09:44, Jayesh Choudhary wrote:
> Convert the bindings for McASP controllers for TI SOCs from txt
> to YAML schema.
> 
> Adds additional properties 'clocks', 'clock-names', 'power-domains',
> '#sound-dai-cells' and 'port' which were missing from the txt file.
> Removes properties 'sram-size-playback' and 'sram-size-capture'
> since they are not used.
> Adds 'dmas' and 'dma-names' in the example which were missing from
> the txt file.
> Changes 'interrupts' and 'interrupt-names' from optional to
> required properties.
> Changes 'op-modes', 'serial-dir' to optional properties as they are
> not needed if the McASP is used only as GPIO.
> Changes 'tdm-slots' to required property only for I2S operation mode.
> 
> Adds the yaml file in the 'MAINTAINERS' under the heading 'TEXAS
> INSTRUMENTS ASoC DRIVERS'

I would have added description for the GPIO support as it is not obvious
that 2 is going to be for AXR2 or 29 is for ACLKR pin.
But I don't think this functionality is going to be used apart from the
one dra7 evm.

Thank you for the updates and the nice work!

Acked-by: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>

> 
> Signed-off-by: Jayesh Choudhary <j-choudhary@xxxxxx>
> ---
> Changelog:
> v5:
> - changes the commit message
> - changes description for 'reg', 'op-mode', 'tx-num-evt',
>   'rx-num-evt' and 'interrupts'
> - adds minimum and maximum for 'tdm-slots'
> - removes default from 'serial-dir'
> - removes maxItems from 'tdm-slots', 'tx-num-evt', 'rx-num-evt' and
>   'auxclk-fs-ratio' as they are of type uint32
> - adds 'tdm-slots' as conditionally required property for I2S mode
>   of operation
> 
> v4:
> - changes the commit message
> - adds type and description to relevant properties
> - changes maxItems for 'serial-dir'
> - removes properties 'sram-size-playback' and 'sram-size-capture'
>   as they are not used
> - removes 'function-gpios'
> - removes 'num-serializer'
> - marks 'tdm-slots', 'op-mode' and 'serial-dir' as optional properties
> - adds the yaml file in MAINTAINERS
> 
> v3:
> - remove maxItems from 'clock-names'
> 
> v2:
> - changes the commit message
> - modifies the properties 'clocks', 'clock-names', 'dma-names',
>   'dmas', 'interrupts' and 'interrupt-names' according to the 
>   arm SOCs
> - adds 'ports' and 'num-serializer' as node properties
> 
>  .../bindings/sound/davinci-mcasp-audio.txt    |  86 --------
>  .../bindings/sound/davinci-mcasp-audio.yaml   | 201 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  3 files changed, 202 insertions(+), 86 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
> deleted file mode 100644
> index bd863bd69501..000000000000
> --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
> +++ /dev/null
> @@ -1,86 +0,0 @@
> -Texas Instruments McASP controller
> -
> -Required properties:
> -- compatible :
> -	"ti,dm646x-mcasp-audio"	: for DM646x platforms
> -	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
> -	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
> -	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
> -	"ti,omap4-mcasp-audio"	: for OMAP4
> -
> -- reg : Should contain reg specifiers for the entries in the reg-names property.
> -- reg-names : Should contain:
> -         * "mpu" for the main registers (required). For compatibility with
> -           existing software, it is recommended this is the first entry.
> -         * "dat" for separate data port register access (optional).
> -- op-mode : I2S/DIT ops mode. 0 for I2S mode. 1 for DIT mode used for S/PDIF,
> -  	    IEC60958-1, and AES-3 formats.
> -- tdm-slots : Slots for TDM operation. Indicates number of channels transmitted
> -  	      or received over one serializer.
> -- serial-dir : A list of serializer configuration. Each entry is a number
> -               indication for serializer pin direction.
> -               (0 - INACTIVE, 1 - TX, 2 - RX)
> -- dmas: two element list of DMA controller phandles and DMA request line
> -        ordered pairs.
> -- dma-names: identifier string for each DMA request line in the dmas property.
> -	     These strings correspond 1:1 with the ordered pairs in dmas. The dma
> -	     identifiers must be "rx" and "tx".
> -
> -Optional properties:
> -
> -- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
> -- tx-num-evt : FIFO levels.
> -- rx-num-evt : FIFO levels.
> -- dismod : Specify the drive on TX pin during inactive slots
> -	0 : 3-state
> -	2 : logic low
> -	3 : logic high
> -	Defaults to 'logic low' when the property is not present
> -- sram-size-playback : size of sram to be allocated during playback
> -- sram-size-capture  : size of sram to be allocated during capture
> -- interrupts : Interrupt numbers for McASP
> -- interrupt-names : Known interrupt names are "tx" and "rx"
> -- pinctrl-0: Should specify pin control group used for this controller.
> -- pinctrl-names: Should contain only one value - "default", for more details
> -  		 please refer to pinctrl-bindings.txt
> -- fck_parent : Should contain a valid clock name which will be used as parent
> -	       for the McASP fck
> -- auxclk-fs-ratio: When McASP is bus master indicates the ratio between AUCLK
> -		   and FS rate if applicable:
> -		   AUCLK rate = auxclk-fs-ratio * FS rate
> -
> -Optional GPIO support:
> -If any McASP pin need to be used as GPIO then the McASP node must have:
> -...
> -  gpio-controller
> -  #gpio-cells = <2>;
> -...
> -
> -When requesting a GPIO, the first parameter is the PIN index in McASP_P*
> -registers.
> -For example to request the AXR2 pin of mcasp8:
> -function-gpios = <&mcasp8 2 0>;
> -
> -Or to request the ACLKR pin of mcasp8:
> -function-gpios = <&mcasp8 29 0>;
> -
> -For generic gpio information, please refer to bindings/gpio/gpio.txt
> -
> -Example:
> -
> -mcasp0: mcasp0@1d00000 {
> -	compatible = "ti,da830-mcasp-audio";
> -	reg = <0x100000 0x3000>;
> -	reg-names "mpu";
> -	interrupts = <82>, <83>;
> -	interrupt-names = "tx", "rx";
> -	op-mode = <0>;		/* MCASP_IIS_MODE */
> -	tdm-slots = <2>;
> -	serial-dir = <
> -			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
> -			0 0 0 0
> -			0 0 0 1
> -			2 0 0 0 >;
> -	tx-num-evt = <1>;
> -	rx-num-evt = <1>;
> -};
> diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
> new file mode 100644
> index 000000000000..f46c66bc6b2d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
> @@ -0,0 +1,201 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/davinci-mcasp-audio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: McASP Controller for TI SoCs
> +
> +maintainers:
> +  - Jayesh Choudhary <j-choudhary@xxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,dm646x-mcasp-audio
> +      - ti,da830-mcasp-audio
> +      - ti,am33xx-mcasp-audio
> +      - ti,dra7-mcasp-audio
> +      - ti,omap4-mcasp-audio
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: CFG registers
> +      - description: data registers
> +
> +  reg-names:
> +    minItems: 1
> +    items:
> +      - const: mpu
> +      - const: dat
> +
> +  op-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: 0 - I2S or 1 - DIT operation mode
> +    enum:
> +      - 0
> +      - 1
> +
> +  tdm-slots:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      number of channels over one serializer
> +      the property is ignored in DIT mode
> +    minimum: 2
> +    maximum: 32
> +
> +  serial-dir:
> +    description:
> +      A list of serializer configuration
> +      Entry is indication for serializer pin direction
> +      0 - Inactive, 1 - TX, 2 - RX
> +      All AXR pins should be present in the array even if inactive
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    maxItems: 25
> +    items:
> +      minimum: 0
> +      maximum: 2
> +
> +  dmas:
> +    minItems: 1
> +    items:
> +      - description: transmission DMA channel
> +      - description: reception DMA channel
> +
> +  dma-names:
> +    minItems: 1
> +    items:
> +      - const: tx
> +      - const: rx
> +
> +  ti,hwmods:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: Name of hwmod associated with McASP
> +    maxItems: 1
> +    deprecated: true
> +
> +  tx-num-evt:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      configures WFIFO threshold
> +      0 disables the FIFO use
> +      if property is missing, then also FIFO use is disabled
> +
> +  rx-num-evt:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      configures RFIFO threshold
> +      0 disables the FIFO use
> +      if property is missing, then also FIFO use is disabled
> +
> +  dismod:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      specify the drive on TX pin during inactive time slots
> +      0 - 3-state, 2 - logic low, 3 - logic high
> +    enum:
> +      - 0
> +      - 2
> +      - 3
> +    default: 2
> +
> +  interrupts:
> +    anyOf:
> +      - minItems: 1
> +        items:
> +          - description: TX interrupt
> +          - description: RX interrupt
> +      - items:
> +          - description: common/combined interrupt
> +
> +  interrupt-names:
> +    oneOf:
> +      - minItems: 1
> +        items:
> +          - const: tx
> +          - const: rx
> +      - const: common
> +
> +  fck_parent:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description: parent clock name for McASP fck
> +    maxItems: 1
> +
> +  auxclk-fs-ratio:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: ratio of AUCLK and FS rate if applicable
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  clocks:
> +    minItems: 1
> +    items:
> +      - description: functional clock
> +      - description: module specific optional ahclkx clock
> +      - description: module specific optional ahclkr clock
> +
> +  clock-names:
> +    minItems: 1
> +    items:
> +      - const: fck
> +      - const: ahclkx
> +      - const: ahclkr
> +
> +  power-domains:
> +    description: phandle to the corresponding power-domain
> +    maxItems: 1
> +
> +  "#sound-dai-cells":
> +    const: 0
> +
> +  port:
> +    description: connection for when McASP is used via graph card
> +    type: object
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - dmas
> +  - dma-names
> +  - interrupts
> +  - interrupt-names
> +
> +allOf:
> +  - if:
> +      properties:
> +        opmode:
> +          enum:
> +            - 0
> +
> +    then:
> +      required:
> +        - tdm-slots
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    mcasp0: mcasp0@1d00000 {
> +      compatible = "ti,da830-mcasp-audio";
> +      reg = <0x100000 0x3000>;
> +      reg-names = "mpu";
> +      interrupts = <82>, <83>;
> +      interrupt-names = "tx", "rx";
> +      op-mode = <0>;		/* MCASP_IIS_MODE */
> +      tdm-slots = <2>;
> +      dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
> +      dma-names = "tx", "rx";
> +      serial-dir = <
> +          0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
> +          0 0 0 0
> +          0 0 0 1
> +          2 0 0 0 >;
> +      tx-num-evt = <1>;
> +      rx-num-evt = <1>;
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5ea5655a29c3..ec6bde4efcae 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18995,6 +18995,7 @@ TEXAS INSTRUMENTS ASoC DRIVERS
>  M:	Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
>  L:	alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
>  S:	Maintained
> +F:	Documentation/devicetree/bindings/sound/davinci-mcasp-audio.yaml
>  F:	sound/soc/ti/
>  
>  TEXAS INSTRUMENTS' DAC7612 DAC DRIVER

-- 
Péter



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux