DT bindings for Texas Instruments TLV320ADC3001 and TLV320ADC3101 audio ADCs. Signed-off-by: Ricard Wanderlof <ricardw@xxxxxxxx> --- .../bindings/sound/ti,tlv320adc3xxx.yaml | 137 ++++++++++++++++++ include/dt-bindings/sound/tlv320adc3xxx.h | 28 ++++ 2 files changed, 165 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml create mode 100644 include/dt-bindings/sound/tlv320adc3xxx.h diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml new file mode 100644 index 000000000000..83936f594d1a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ti,tlv320adc3xxx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TLV320ADC3001/TLV320ADC3101 Stereo ADC + +maintainers: + - Ricard Wanderlof <ricardw@xxxxxxxx> + +description: | + Texas Instruments TLV320ADC3001 and TLV320ADC3101 Stereo ADC + https://www.ti.com/product/TLV320ADC3001 + https://www.ti.com/product/TLV320ADC3101 + +properties: + compatible: + enum: + - ti,tlv320adc3001 + - ti,tlv320adc3101 + + reg: + maxItems: 1 + description: I2C address + + '#sound-dai-cells': + const: 0 + + '#gpio-cells': + const: 2 + + gpio-controller: true + + reset-gpios: + maxItems: 1 + description: GPIO pin used for codec reset (RESET pin) + + clocks: + maxItems: 1 + description: Master clock (MCLK) + + ti,dmdin-gpio1: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMDIN/GPIO1 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + ti,dmclk-gpio2: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_GPIO_DISABLED - I/O buffers powered down and not used + - 1 # ADC3XXX_GPIO_INPUT - Various non-GPIO input functions + - 2 # ADC3XXX_GPIO_GPI - General purpose input + - 3 # ADC3XXX_GPIO_GPO - General purpose output + - 4 # ADC3XXX_GPIO_CLKOUT - Clock source set in CLKOUT_MUX reg + - 5 # ADC3XXX_GPIO_INT1 - INT1 output + - 6 # ADC3XXX_GPIO_SECONDARY_BCLK - Codec interface secondary BCLK + - 7 # ADC3XXX_GPIO_SECONDARY_WCLK - Codec interface secondary WCLK + default: 0 + description: | + Configuration for DMCLK/GPIO2 pin. + + When ADC3XXX_GPIO_GPO is configured, this causes corresponding the + ALSA control "GPIOx Output" to appear, as a switch control. + + Note that there is currently no support for reading the GPIO pins as + inputs. + + ti,micbias1-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS1 pin + + ti,micbias2-vg: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # ADC3XXX_MICBIAS_OFF - Mic bias is powered down + - 1 # ADC3XXX_MICBIAS_2_0V - Mic bias is set to 2.0V + - 2 # ADC3XXX_MICBIAS_2_5V - Mic bias is set to 2.5V + - 3 # ADC3XXX_MICBIAS_AVDD - Mic bias is same as AVDD supply + default: 0 + description: | + Mic bias voltage output on MICBIAS2 pin + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/sound/tlv320adc3xxx.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + tlv320adc3101: audio-codec@18 { + compatible = "ti,tlv320adc3101"; + reg = <0x18>; + reset-gpios = <&gpio_pc 3 GPIO_ACTIVE_LOW>; + clocks = <&audio_mclk>; + gpio-controller; + #gpio-cells = <2>; + ti,dmdin-gpio1 = <ADC3XXX_GPIO_GPO>; + ti,micbias1-vg = <ADC3XXX_MICBIAS_AVDD>; + }; + }; + + audio_mclk: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +... diff --git a/include/dt-bindings/sound/tlv320adc3xxx.h b/include/dt-bindings/sound/tlv320adc3xxx.h new file mode 100644 index 000000000000..ec988439da20 --- /dev/null +++ b/include/dt-bindings/sound/tlv320adc3xxx.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Devicetree bindings definitions for tlv320adc3xxx driver. + * + * Copyright (C) 2021 Axis Communications AB + */ +#ifndef __DT_TLV320ADC3XXX_H +#define __DT_TLV320ADC3XXX_H + +#define ADC3XXX_GPIO_DISABLED 0 /* I/O buffers powered down */ +#define ADC3XXX_GPIO_INPUT 1 /* Various non-GPIO inputs */ +#define ADC3XXX_GPIO_GPI 2 /* General purpose input */ +#define ADC3XXX_GPIO_GPO 3 /* General purpose output */ +#define ADC3XXX_GPIO_CLKOUT 4 /* Source set in reg. CLKOUT_MUX */ +#define ADC3XXX_GPIO_INT1 5 /* INT1 output */ +#define ADC3XXX_GPIO_INT2 6 /* INT2 output */ +/* value 7 is reserved */ +#define ADC3XXX_GPIO_SECONDARY_BCLK 8 /* Codec interface secondary BCLK */ +#define ADC3XXX_GPIO_SECONDARY_WCLK 9 /* Codec interface secondary WCLK */ +#define ADC3XXX_GPIO_ADC_MOD_CLK 10 /* Clock output for digital mics */ +/* values 11-15 reserved */ + +#define ADC3XXX_MICBIAS_OFF 0 /* Micbias pin powered off */ +#define ADC3XXX_MICBIAS_2_0V 1 /* Micbias pin set to 2.0V */ +#define ADC3XXX_MICBIAS_2_5V 2 /* Micbias pin set to 2.5V */ +#define ADC3XXX_MICBIAS_AVDD 3 /* Use AVDD voltage for micbias pin */ + +#endif /* __DT_TLV320ADC3XXX_H */ -- 2.20.1 -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30
