On Sat, 11 Dec 2021 19:19:30 +0100, Colin King (gmail) wrote: > > Hi, > > static analysis with scan-build has found an assignment to vp2 that is > never used in function snd_opl3_note_on(), > sound/drivers/opl3/opl3_midi.c as follows: > > if (instr_4op) { > vp2 = &opl3->voices[voice + 3]; > if (vp->state > 0) { > opl3_reg = reg_side | (OPL3_REG_KEYON_BLOCK + > voice_offset + 3); > reg_val = vp->keyon_reg & ~OPL3_KEYON_BIT; > opl3->command(opl3, opl3_reg, reg_val); > } > } > > sound/drivers/opl3/opl3_midi.c:399:3: warning: Value stored to 'vp2' > is never read [deadcode.DeadStores] > vp2 = &opl3->voices[voice + 3]; > ^ ~~~~~~~~~~~~~~~~~~~~~~~~ > > I suspect that references to vp in this if block should be to vp2, but > I'm unsure if that is for all references or not, hence I'm reporting > this issue. Yes, the next vp->state > 0 check must be vp2->state > 0. Care to submit a proper fix patch? Thanks! Takashi