We've been adding a 'deep buffer' PCM device to several SOF topologies in order to reduce power consumption. The typical use-case would be music playback over a headset: this additional PCM device provides more buffering and longer latencies, leaving the rest of the system sleep for longer periods. Notifications and 'regular' low-latency audio playback would still use the 'normal' PCM device and be mixed with the 'deep buffer' before rendering on the headphone endpoint. The tentative direction would be to expose this alternate device to PulseAudio/PipeWire/CRAS via the UCM SectionModifier definitions. That seemed a straightforward topology change until our automated validation stress tests started reporting issues on SoundWire platforms, when e.g. two START triggers might be send and conversely the STOP trigger is never sent. The SoundWire stream state management flagged inconsistent states when the two 'normal' and 'deep buffer' devices are used concurrently with rapid play/stop/pause monkey testing. Looking at the soc-pcm.c code, it seems that the BE state management needs a lot of love. a) there is no consistent protection for the BE state. In some parts of the code, the state updates are protected by a spinlock but in the trigger they are not. When we open/play/close the two PCM devices in stress tests, we end-up testing a state that is being modified. That can't be good. b) there is a conceptual deadlock: on stop we check the FE states to see if a shared BE can be stopped, but since we trigger the BE first the FE states have not been modified yet, so the TRIGGER_STOP is never sent. This patchset suggests the removal of the dedicated 'dpcm_lock' and follows the design suggested by Takashi Iwai. By default the protection relies on the 'pcm_mutex', except for the FE and BE triggers where the mutex cannot be used. In this case, the FE PCM lock is used instead. In the cases where a BE is added/removed, the pcm_mutex and FE PCM lock are both taken. In addition, the BE PCM lock is used to serialize access to a shared BE. With these patches I am able to run our entire validation suite without any issues with this new 'deep buffer' topology, and no regressions on existing solutions [1]. The tests were reproduced by Bard Liao for SoundWire devices. One might ask 'how come we didn't see this earlier'? The answer is probably that the .trigger callbacks in most implementations seems to perform DAPM operations, and sending the triggers multiple times is not an issue. In the case of SoundWire, we do use the .trigger callback to reconfigure the bus using the 'bank switch' mechanism. It could be acceptable to tolerate a trigger multiple times, but the deadlock on stop cannot be fixed at the SoundWire level alone. Opens: 1) The issues reported by Nvidia on the RFCv3 may or may not be present. We'd need test results to make sure the locking update does not introduce a regression on Tegra. 2) There are other reports of kernel oopses [2] that seem related to the lack of protection. I'd be good to confirm if this patchset solve these problems as well. [1] https://github.com/thesofproject/linux/pull/3146 [2] https://lore.kernel.org/alsa-devel/002f01d7b4f5$c030f4a0$4092dde0$@samsung.com/ changes since RFCv3: Used two patches from Takashi. We now use the pcm_mutex, the FE stream lock when adding and deleting a BE, and the BE stream lock to handle concurrency between streams using the same BE. Added a patch to use GFP_ATOMIC for the DPCM structure. Fixed PAUSE_RELEASE transition (GitHub comment from Kai Vehmanen) changes since RFCv2: Removal of dpcm_lock to use FE PCM locks (credits to Takashi Iwai for the suggestion). The FE PCM lock is now used before each use of for_each_dpcm_be() - with the exception of the trigger where the lock is already taken. This change is also applied in drivers which make use of this loop (compress, SH, FSL). Addition of BE PCM lock to deal with mutual exclusion between triggers for the same BE. Alignment of the BE atomicity on the FE on connections, this is required to avoid sleeping in atomic context. Additional cleanups (indentation, static functions) changes since RFC v1: Removed unused function Removed exported symbols only used in soc-pcm.c, used static instead Use a mutex instead of a spinlock Protect all for_each_dpcm_be() loops Fix bugs introduced in the refcount Pierre-Louis Bossart (4): ASoC: soc-pcm: use GFP_ATOMIC for dpcm structure ASoC: soc-pcm: align BE 'atomicity' with that of the FE ASoC: soc-pcm: test refcount before triggering ASoC: soc-pcm: fix BE handling of PAUSE_RELEASE Takashi Iwai (2): ASoC: soc-pcm: Fix and cleanup DPCM locking ASoC: soc-pcm: serialize BE triggers include/sound/soc-dpcm.h | 2 + include/sound/soc.h | 2 - sound/soc/soc-core.c | 1 - sound/soc/soc-pcm.c | 351 +++++++++++++++++++++++++++------------ 4 files changed, 246 insertions(+), 110 deletions(-) -- 2.25.1
