Thanks Stephan for doing this,
I have tested DB410c this use case in the past using similar patch [1].
Over all it looks good, except one comment.
On 02/12/2021 14:55, Stephan Gerhold wrote:
The apq8016-sbc-sndcard is designed to be used with the LPASS drivers
(bypassing the combined audio/modem DSP in MSM8916/APQ8016).
Make it possible to use QDSP6 audio instead for the msm8916-qdsp6-sndcard.
This only requires adding some additional hooks that set up the DPCM
backends correctly. Similar code is already used in drivers for newer
SoCs such as apq8096.c, sdm845.c and sm8250.c.
A slightly different initialization sequence is used for the apq8016-sbc
and msm8916-qdsp6 sound card by defining the apq8016_sbc_add_ops()
function as device match data.
Other alternative is to reuse card->name populated from "qcom,model"
property to differentiate between both of these.
This should also help in differentiating UCM configs.
Cc: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Few minor nits, other than that it LGTM,
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
sound/soc/qcom/apq8016_sbc.c | 134 +++++++++++++++++++++++++++++++++--
1 file changed, 129 insertions(+), 5 deletions(-)
diff --git a/sound/soc/qcom/apq8016_sbc.c b/sound/soc/qcom/apq8016_sbc.c
index ba2a98268ee4..f9d69375320e 100644
--- a/sound/soc/qcom/apq8016_sbc.c
+++ b/sound/soc/qcom/apq8016_sbc.c
@@ -17,6 +17,9 @@
#include <uapi/linux/input-event-codes.h>
#include <dt-bindings/sound/apq8016-lpass.h>
#include "common.h"
+#include "qdsp6/q6afe.h"
+
+#define MI2S_COUNT (MI2S_QUATERNARY + 1)
struct apq8016_sbc_data {
struct snd_soc_card card;
@@ -24,6 +27,7 @@ struct apq8016_sbc_data {
void __iomem *spkr_iomux;
struct snd_soc_jack jack;
bool jack_setup;
+ int mi2s_clk_count[MI2S_COUNT];
};
#define MIC_CTRL_TER_WS_SLAVE_SEL BIT(21)
@@ -38,10 +42,10 @@ struct apq8016_sbc_data {
#define SPKR_CTL_TLMM_WS_EN_SEL_MASK GENMASK(19, 18)
#define SPKR_CTL_TLMM_WS_EN_SEL_SEC BIT(18)
#define DEFAULT_MCLK_RATE 9600000
+#define MI2S_BCLK_RATE 1536000
-static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
+static int apq8016_dai_init(struct snd_soc_pcm_runtime *rtd, int mi2s)
{
- struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
struct snd_soc_dai *codec_dai;
struct snd_soc_component *component;
struct snd_soc_card *card = rtd->card;
@@ -49,7 +53,7 @@ static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
int i, rval;
u32 value;
- switch (cpu_dai->id) {
+ switch (mi2s) {
case MI2S_PRIMARY:
writel(readl(pdata->spkr_iomux) | SPKR_CTL_PRI_WS_SLAVE_SEL_11,
pdata->spkr_iomux);
@@ -128,6 +132,13 @@ static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
return 0;
}
+static int apq8016_sbc_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ return apq8016_dai_init(rtd, cpu_dai->id);
+}
+
static void apq8016_sbc_add_ops(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link;
@@ -137,6 +148,113 @@ static void apq8016_sbc_add_ops(struct snd_soc_card *card)
link->init = apq8016_sbc_dai_init;
}
+static int qdsp6_dai_get_lpass_id(struct snd_soc_dai *cpu_dai)
+{
+ switch (cpu_dai->id) {
+ case PRIMARY_MI2S_RX:
+ case PRIMARY_MI2S_TX:
+ return MI2S_PRIMARY;
+ case SECONDARY_MI2S_RX:
+ case SECONDARY_MI2S_TX:
+ return MI2S_SECONDARY;
+ case TERTIARY_MI2S_RX:
+ case TERTIARY_MI2S_TX:
+ return MI2S_TERTIARY;
+ case QUATERNARY_MI2S_RX:
+ case QUATERNARY_MI2S_TX:
+ return MI2S_QUATERNARY;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int msm8916_qdsp6_dai_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBS_CFS);
+ return apq8016_dai_init(rtd, qdsp6_dai_get_lpass_id(cpu_dai));
+}
+
+static int msm8916_qdsp6_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct apq8016_sbc_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ int mi2s, ret;
+
+ mi2s = qdsp6_dai_get_lpass_id(cpu_dai);
+ if (mi2s < 0)
+ return mi2s;
+
+ if (++data->mi2s_clk_count[mi2s] > 1)
+ return 0;
+
Am assuming that as you are not setting any DIGITAL CDC clock here you
might be using an external codec.
+ ret = snd_soc_dai_set_sysclk(cpu_dai, LPAIF_BIT_CLK, MI2S_BCLK_RATE, 0);
+ if (ret)
+ dev_err(card->dev, "Failed to enable LPAIF bit clk: %d\n", ret);
+ return ret;
+}
+
+static void msm8916_qdsp6_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct apq8016_sbc_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ int mi2s, ret;
+
+ mi2s = qdsp6_dai_get_lpass_id(cpu_dai);
+ if (mi2s < 0)
+ return;
+
+ if (--data->mi2s_clk_count[mi2s] > 0)
+ return;
+
+ ret = snd_soc_dai_set_sysclk(cpu_dai, LPAIF_BIT_CLK, 0, 0);
+ if (ret)
+ dev_err(card->dev, "Failed to disable LPAIF bit clk: %d\n", ret);
+}
+
+static const struct snd_soc_ops msm8916_qdsp6_be_ops = {
+ .startup = msm8916_qdsp6_startup,
+ .shutdown = msm8916_qdsp6_shutdown,
+};
+
+static int msm8916_qdsp6_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_interval *rate = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_RATE);
+ struct snd_interval *channels = hw_param_interval(params,
+ SNDRV_PCM_HW_PARAM_CHANNELS);
+ struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT);
+
+ rate->min = rate->max = 48000;
+ channels->min = channels->max = 2;
+ snd_mask_set_format(fmt, SNDRV_PCM_FORMAT_S16_LE);
+
+ return 0;
+}
+
+static void msm8916_qdsp6_add_ops(struct snd_soc_card *card)
+{
+ struct snd_soc_dai_link *link;
+ int i;
+
+ /* Make it obvious to userspace that QDSP6 is used */
+ card->components = "qdsp6";
+
+ for_each_card_prelinks(card, i, link) {
+ if (link->no_pcm) {
+ link->init = msm8916_qdsp6_dai_init;
+ link->ops = &msm8916_qdsp6_be_ops;
+ link->be_hw_params_fixup = msm8916_qdsp6_be_hw_params_fixup;
+ }
+ }
+}
+
static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
SND_SOC_DAPM_MIC("Handset Mic", NULL),
@@ -148,11 +266,16 @@ static const struct snd_soc_dapm_widget apq8016_sbc_dapm_widgets[] = {
static int apq8016_sbc_platform_probe(struct platform_device *pdev)
{
+ void (*add_ops)(struct snd_soc_card *card);
struct device *dev = &pdev->dev;
struct snd_soc_card *card;
struct apq8016_sbc_data *data;
int ret;
+ add_ops = device_get_match_data(&pdev->dev);
+ if (!add_ops)
+ return -EINVAL;
We will never hit the error case here because without a match we can not
even enter the probe function.
--srini
+
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -177,12 +300,13 @@ static int apq8016_sbc_platform_probe(struct platform_device *pdev)
snd_soc_card_set_drvdata(card, data);
- apq8016_sbc_add_ops(card);
+ add_ops(card);
return devm_snd_soc_register_card(&pdev->dev, card);
}
static const struct of_device_id apq8016_sbc_device_id[] __maybe_unused = {
- { .compatible = "qcom,apq8016-sbc-sndcard" },
+ { .compatible = "qcom,apq8016-sbc-sndcard", .data = apq8016_sbc_add_ops },
+ { .compatible = "qcom,msm8916-qdsp6-sndcard", .data = msm8916_qdsp6_add_ops },
{},
};
MODULE_DEVICE_TABLE(of, apq8016_sbc_device_id);
[1]:
https://git.linaro.org/people/srinivas.kandagatla/linux.git/commit/?h=q6dsp-db410c-v5.11-rc6&id=9d62822a5f66cd06a5e6b31f6b841a25c143926c
