Re: [PATCH v6 03/10] ASoC: qcom: Add register definition for codec rddma and wrdma

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/1/2021 8:21 PM, Srinivas Kandagatla wrote:
Thanks for your time Srini!!!

On 26/11/2021 12:04, Srinivasa Rao Mandadapu wrote:
This patch adds register definitions for codec read dma and write dma
lpass interface.

Signed-off-by: Srinivasa Rao Mandadapu <srivasam@xxxxxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <potturu@xxxxxxxxxxxxxx>
---
  sound/soc/qcom/lpass-lpaif-reg.h | 103 ++++++++++++++++++++++++++++++++++++---
  1 file changed, 97 insertions(+), 6 deletions(-)

diff --git a/sound/soc/qcom/lpass-lpaif-reg.h b/sound/soc/qcom/lpass-lpaif-reg.h
index 2eb03ad..697a11f 100644
--- a/sound/soc/qcom/lpass-lpaif-reg.h
+++ b/sound/soc/qcom/lpass-lpaif-reg.h
@@ -74,6 +74,16 @@
  #define LPAIF_IRQSTAT_REG(v, port)    LPAIF_IRQ_REG_ADDR(v, 0x4, (port))   #define LPAIF_IRQCLEAR_REG(v, port)    LPAIF_IRQ_REG_ADDR(v, 0xC, (port))
  +/* LPAIF RXTX IRQ */
+#define LPAIF_RXTX_IRQ_REG_ADDR(v, addr, port, dai_id) \
+        ((dai_id == LPASS_CDC_DMA_RX0 || dai_id == LPASS_CDC_DMA_TX3) ? \ +        (v->rxtx_irq_reg_base + (addr) + v->rxtx_irq_reg_stride * (port)) : \
+        (v->va_irq_reg_base + (addr) + v->va_irq_reg_stride * (port)))
+
+#define LPAIF_RXTX_IRQEN_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0x0, port, dai_id) +#define LPAIF_RXTX_IRQSTAT_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0x4, port, dai_id) +#define LPAIF_RXTX_IRQCLEAR_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0xC, port, dai_id)
+

How about doing like this:


/* LPAIF RXTX IRQ */
#define LPAIF_RXTX_IRQ_REG_ADDR(v, addr, port) \
        (v->rxtx_irq_reg_base + (addr) + v->rxtx_irq_reg_stride * (port))

#define LPAIF_RXTX_IRQEN_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0x0, port) #define LPAIF_RXTX_IRQSTAT_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0x4, port) #define LPAIF_RXTX_IRQCLEAR_REG(v, port, dai_id) LPAIF_RXTX_IRQ_REG_ADDR(v, 0xC, port)

/* LPAIF VA IRQ */
#define LPAIF_VA_IRQ_REG_ADDR(v, addr, port) \
        (v->va_irq_reg_base + (addr) + v->va_irq_reg_stride * (port))

#define LPAIF_VA_IRQEN_REG(v, port, dai_id) LPAIF_VA_IRQ_REG_ADDR(v, 0x0, port) #define LPAIF_VA_IRQSTAT_REG(v, port, dai_id) LPAIF_VA_IRQ_REG_ADDR(v, 0x4, port) #define LPAIF_VA_IRQCLEAR_REG(v, port, dai_id) LPAIF_VA_IRQ_REG_ADDR(v, 0xC, port)

With this we are seeing number macros increasing. How about handling like below.
lpass.h:

static inline bool is_rxtx_cdc_dma_port(int dai_id)
{

    switch (dai_id) {
        case LPASS_CDC_DMA_RX0 ... LPASS_CDC_DMA_RX9:
        case LPASS_CDC_DMA_TX0 ... LPASS_CDC_DMA_TX8:
            return true;
        default:
            return false;
      }
}


Usage:

#define LPAIF_RXTX_IRQ_REG_ADDR(v, addr, port, dai_id) \
is_rxtx_cdc_dma_port(dai_id) ? \
(v->rxtx_irq_reg_base + (addr) + v->rxtx_irq_reg_stride * (port)) : \
(v->va_irq_reg_base + (addr) + v->va_irq_reg_stride * (port))



    #define LPASS_HDMITX_APP_IRQ_REG_ADDR(v, addr)  \
      ((v->hdmi_irq_reg_base) + (addr))
@@ -139,12 +149,93 @@
          (LPAIF_INTFDMA_REG(v, chan, reg, dai_id)) : \
          LPAIF_WRDMA##reg##_REG(v, chan))
  -#define LPAIF_DMACTL_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, CTL, dai_id) -#define LPAIF_DMABASE_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, BASE, dai_id) -#define    LPAIF_DMABUFF_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, BUFF, dai_id) -#define LPAIF_DMACURR_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, CURR, dai_id) -#define    LPAIF_DMAPER_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, PER, dai_id) -#define    LPAIF_DMAPERCNT_REG(v, chan, dir, dai_id) __LPAIF_DMA_REG(v, chan, dir, PERCNT, dai_id)
+#define LPAIF_DMACTL_REG(v, chan, dir, dai_id)  \
+    (((dai_id == LPASS_CDC_DMA_RX0) || \
+    (dai_id == LPASS_CDC_DMA_TX3) || \
+    (dai_id == LPASS_CDC_DMA_VA_TX0)) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, CTL, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, CTL, dai_id))


How about:

#define LPAIF_DMACTL_REG(v, chan, dir, dai_id)  \
    is_cdc_dma_port(dai_id) ? \
    __LPAIF_CDC_DMA_REG(v, chan, dir, CTL, dai_id) : \
    __LPAIF_DMA_REG(v, chan, dir, CTL, dai_id)

Yes this looks clean and handles all ports.

simillar comments to most of the macros in this patch that are directly comparing the dai_ids.
Okay. Will change accordingly.


+#define LPAIF_DMABASE_REG(v, chan, dir, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || \
+    dai_id == LPASS_CDC_DMA_TX3 || \
+    dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, BASE, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, BASE, dai_id))
+#define LPAIF_DMABUFF_REG(v, chan, dir, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || \
+    dai_id == LPASS_CDC_DMA_TX3 || \
+    dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, BUFF, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, BUFF, dai_id))
+#define LPAIF_DMACURR_REG(v, chan, dir, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || \
+    dai_id == LPASS_CDC_DMA_TX3 || \
+    dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, CURR, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, CURR, dai_id))
+#define LPAIF_DMAPER_REG(v, chan, dir, dai_id)  \
+    ((dai_id == LPASS_CDC_DMA_RX0 || \
+    dai_id == LPASS_CDC_DMA_TX3 || \
+    dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, PER, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, PER, dai_id))
+#define LPAIF_DMAPERCNT_REG(v, chan, dir, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || \
+    dai_id == LPASS_CDC_DMA_TX3 || \
+    dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+    __LPAIF_CDC_DMA_REG(v, chan, dir, PERCNT, dai_id) : \
+    __LPAIF_DMA_REG(v, chan, dir, PERCNT, dai_id))
+
+#define LPAIF_CDC_RDMA_REG_ADDR(v, addr, chan, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || dai_id == LPASS_CDC_DMA_TX3) ? \
+    (v->rxtx_rdma_reg_base + (addr) + v->rxtx_rdma_reg_stride * (chan)) : \
+    (v->va_rdma_reg_base + (addr) + v->va_rdma_reg_stride * (chan)))
+
+#define LPAIF_CDC_RDMACTL_REG(v, chan, dai_id) LPAIF_CDC_RDMA_REG_ADDR(v, 0x00, (chan), dai_id) +#define LPAIF_CDC_RDMABASE_REG(v, chan, dai_id) LPAIF_CDC_RDMA_REG_ADDR(v, 0x04, (chan), dai_id) +#define LPAIF_CDC_RDMABUFF_REG(v, chan, dai_id) LPAIF_CDC_RDMA_REG_ADDR(v, 0x08, (chan), dai_id) +#define LPAIF_CDC_RDMACURR_REG(v, chan, dai_id) LPAIF_CDC_RDMA_REG_ADDR(v, 0x0C, (chan), dai_id) +#define LPAIF_CDC_RDMAPER_REG(v, chan, dai_id) LPAIF_CDC_RDMA_REG_ADDR(v, 0x10, (chan), dai_id)
+
+#define LPAIF_CDC_RDMA_INTF_REG(v, chan, dai_id) \
+    LPAIF_CDC_RDMA_REG_ADDR(v, 0x50, (chan), dai_id)
+
+#define LPAIF_CDC_WRDMA_REG_ADDR(v, addr, chan, dai_id) \
+    ((dai_id == LPASS_CDC_DMA_RX0 || dai_id == LPASS_CDC_DMA_TX3) ? \
+    (v->rxtx_wrdma_reg_base + (addr) + \
+    v->rxtx_wrdma_reg_stride * (chan - v->rxtx_wrdma_channel_start)) : \
+    (v->va_wrdma_reg_base + (addr) + \
+    v->va_wrdma_reg_stride * (chan - v->va_wrdma_channel_start)))

Can we split this to LPAIF_CDC_TXRX_WRDMA_REG_ADDR and
LPAIF_CDC_VA_WRDMA_REG_ADDR macros?

How about this way?

#define LPAIF_CDC_WRDMA_REG_ADDR(v, addr, chan, dai_id) \
is_rxtx_cdc_dma_port(dai_id) ? \
(v->rxtx_wrdma_reg_base + (addr) + \
v->rxtx_wrdma_reg_stride * (chan - v->rxtx_wrdma_channel_start)) : \
(v->va_wrdma_reg_base + (addr) + \
v->va_wrdma_reg_stride * (chan - v->va_wrdma_channel_start))


--srini

+
+#define LPAIF_CDC_WRDMACTL_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x00, (chan), dai_id)
+#define LPAIF_CDC_WRDMABASE_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x04, (chan), dai_id)
+#define LPAIF_CDC_WRDMABUFF_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x08, (chan), dai_id)
+#define LPAIF_CDC_WRDMACURR_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x0C, (chan), dai_id)
+#define LPAIF_CDC_WRDMAPER_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x10, (chan), dai_id)
+#define LPAIF_CDC_WRDMA_INTF_REG(v, chan, dai_id) \
+    LPAIF_CDC_WRDMA_REG_ADDR(v, 0x50, (chan), dai_id)
+
+#define __LPAIF_CDC_DMA_REG(v, chan, dir, reg, dai_id)  \
+        ((dir ==  SNDRV_PCM_STREAM_PLAYBACK) ? \
+        (LPAIF_CDC_RDMA##reg##_REG(v, chan, dai_id)) : \
+        LPAIF_CDC_WRDMA##reg##_REG(v, chan, dai_id))
+
+#define LPAIF_CDC_INTF_REG(v, chan, dir, dai_id) \
+        ((dir ==  SNDRV_PCM_STREAM_PLAYBACK) ? \
+        LPAIF_CDC_RDMA_INTF_REG(v, chan, dai_id) : \
+        LPAIF_CDC_WRDMA_INTF_REG(v, chan, dai_id))
+
+#define LPAIF_INTF_REG(v, chan, dir, dai_id) \
+        ((dai_id == LPASS_CDC_DMA_RX0 || \
+        dai_id == LPASS_CDC_DMA_TX3 || \
+        dai_id == LPASS_CDC_DMA_VA_TX0) ? \
+        LPAIF_CDC_INTF_REG(v, chan, dir, dai_id) : \
+        LPAIF_DMACTL_REG(v, chan, dir, dai_id))
    #define LPAIF_DMACTL_BURSTEN_SINGLE    0
  #define LPAIF_DMACTL_BURSTEN_INCR4    1

--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux