From: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> The DAI_CONFIG IPC that is sent during the STOP trigger is used for stopping the DMA in the FW. This must be done after the DMA RUN bit is cleared by the host. So move the call to snd_hdac_ext_link_stream_clear() before hda_link_dai_widget_update() to follow the correct programming sequence for DMA stop for HDA DAIs. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Signed-off-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx> --- sound/soc/sof/intel/hda-dai.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index 5c9ee6c49473..748e8ed61475 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -329,6 +329,8 @@ static int hda_link_pcm_trigger(struct snd_pcm_substream *substream, break; case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_STOP: + snd_hdac_ext_link_stream_clear(link_dev); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) w = dai->playback_widget; else @@ -347,8 +349,7 @@ static int hda_link_pcm_trigger(struct snd_pcm_substream *substream, } link_dev->link_prepared = 0; - - fallthrough; + break; case SNDRV_PCM_TRIGGER_PAUSE_PUSH: snd_hdac_ext_link_stream_clear(link_dev); break; -- 2.33.0
