Stream IDs are reused across multiple BackEnd mixers, do not reset the stream mixers if they are not already set for that particular FrontEnd. Ex: amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1 would set the MultiMedia1 steam for SLIMBUS_0_RX, however doing below command will reset previously setup MultiMedia1 stream, because both of them are using MultiMedia1 PCM stream. amixer cset iface=MIXER,name='SLIMBUS_2_RX Audio Mixer MultiMedia1' 0 reset the FrontEnd Mixers conditionally to fix this issue. This is more noticeable in desktop setup, where in alsactl tries to restore the alsa state and overwriting the previous mixer settings. Fixes: e3a33673e845 ("ASoC: qdsp6: q6routing: Add q6routing driver") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> --- sound/soc/qcom/qdsp6/q6routing.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6routing.c b/sound/soc/qcom/qdsp6/q6routing.c index 3390ebef9549..243b8179e59d 100644 --- a/sound/soc/qcom/qdsp6/q6routing.c +++ b/sound/soc/qcom/qdsp6/q6routing.c @@ -495,7 +495,11 @@ static int msm_routing_put_audio_mixer(struct snd_kcontrol *kcontrol, session->port_id = be_id; snd_soc_dapm_mixer_update_power(dapm, kcontrol, 1, update); } else { - session->port_id = -1; + if (session->port_id == be_id) { + session->port_id = -1; + return 0; + } + snd_soc_dapm_mixer_update_power(dapm, kcontrol, 0, update); } -- 2.21.0