The hard RESET must be used to correctly power-up the cs42l42, as described in the datasheet. The code was getting the GPIO with devm_gpiod_get_optional(). Change this to devm_gpiod_get(). Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx> --- sound/soc/codecs/cs42l42.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c index 0ecf2129ea45..629a0783e693 100644 --- a/sound/soc/codecs/cs42l42.c +++ b/sound/soc/codecs/cs42l42.c @@ -2034,17 +2034,14 @@ static int cs42l42_i2c_probe(struct i2c_client *i2c_client, } /* Reset the Device */ - cs42l42->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, - "reset", GPIOD_OUT_LOW); + cs42l42->reset_gpio = devm_gpiod_get(&i2c_client->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(cs42l42->reset_gpio)) { ret = PTR_ERR(cs42l42->reset_gpio); + dev_err(&i2c_client->dev, "Failed to request reset gpio: %d\n", ret); goto err_disable; } - if (cs42l42->reset_gpio) { - dev_dbg(&i2c_client->dev, "Found reset GPIO\n"); - gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); - } + gpiod_set_value_cansleep(cs42l42->reset_gpio, 1); usleep_range(CS42L42_BOOT_TIME_US, CS42L42_BOOT_TIME_US * 2); /* Request IRQ */ -- 2.11.0