> On Tue, Sep 07, 2021 at 05:11:09PM +0800, Shengjiu Wang wrote:
> > There is a noise issue for 8kHz sample rate on slave mode.
> > Compared with master mode, the difference is the DACDIV setting, after
> > correcting the DACDIV, the noise is gone.
> >
> > There is no noise issue for 48kHz sample rate, because the default
> > value of DACDIV is correct for 48kHz.
> >
> > So wm8960_configure_clocking() should be functional for ADC and DAC
> > function even if it is slave mode.
> >
> > In order to be compatible for old use case, just add condition for
> > checking that sysclk is zero with slave mode.
> >
> > Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its
> > bit clock and frame clock")
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > ---
> > sound/soc/codecs/wm8960.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
> > index 9e621a254392..9c6af76a60fd 100644
> > --- a/sound/soc/codecs/wm8960.c
> > +++ b/sound/soc/codecs/wm8960.c
> > @@ -742,7 +742,7 @@ static int wm8960_configure_clocking(struct
> snd_soc_component *component)
> > int i, j, k;
> > int ret;
> >
> > - if (!(iface1 & (1<<6))) {
> > + if (!(iface1 & (1 << 6)) && !wm8960->sysclk) {
> > dev_dbg(component->dev,
> > "Codec is slave mode, no need to configure
> > clock\n");
>
> Looking through the datasheet it just looks like this if statement has always
> been non-sense, it looks pretty clear the clocking should still be configured in
> slave mode (apart from BCLKDIV which is presumably ignored in slave mode).
>
> I would be slightly inclined to suggest it would be better to just fixup any
> systems not setting sysclk for slave mode, but I am assuming you are talking
> primarily about out of tree systems. So I think we need to at least update the
> message here as well, it should probably change to a warning and state that
> the we are proceeding with no clock configuration, rather than erroneously
> saying it doesn't need one.
>
> Thanks,
> Charles
Sorry for missing your email. I will update it in v2.
Thanks.
Best regards
Wang Shengjiu
