On SM8250 MTP boards WCD938x codec is connected via TX and RX Macros,
so add support for this dais in the soundcard driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
sound/soc/qcom/sm8250.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/sound/soc/qcom/sm8250.c b/sound/soc/qcom/sm8250.c
index fe8fd7367e21..9f2f0598a222 100644
--- a/sound/soc/qcom/sm8250.c
+++ b/sound/soc/qcom/sm8250.c
@@ -69,6 +69,12 @@ static int sm8250_snd_hw_params(struct snd_pcm_substream *substream,
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
+ case RX_CODEC_DMA_RX_0:
+ case RX_CODEC_DMA_RX_1:
+ case TX_CODEC_DMA_TX_0:
+ case TX_CODEC_DMA_TX_1:
+ case TX_CODEC_DMA_TX_2:
+ case TX_CODEC_DMA_TX_3:
for_each_rtd_codec_dais(rtd, i, codec_dai) {
sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
substream->stream);
@@ -129,6 +135,12 @@ static int sm8250_snd_prepare(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
+ case RX_CODEC_DMA_RX_0:
+ case RX_CODEC_DMA_RX_1:
+ case TX_CODEC_DMA_TX_0:
+ case TX_CODEC_DMA_TX_1:
+ case TX_CODEC_DMA_TX_2:
+ case TX_CODEC_DMA_TX_3:
return sm8250_snd_wsa_dma_prepare(substream);
default:
break;
@@ -147,6 +159,12 @@ static int sm8250_snd_hw_free(struct snd_pcm_substream *substream)
switch (cpu_dai->id) {
case WSA_CODEC_DMA_RX_0:
case WSA_CODEC_DMA_RX_1:
+ case RX_CODEC_DMA_RX_0:
+ case RX_CODEC_DMA_RX_1:
+ case TX_CODEC_DMA_TX_0:
+ case TX_CODEC_DMA_TX_1:
+ case TX_CODEC_DMA_TX_2:
+ case TX_CODEC_DMA_TX_3:
if (sruntime && data->stream_prepared[cpu_dai->id]) {
sdw_disable_stream(sruntime);
sdw_deprepare_stream(sruntime);
--
2.21.0
