If snd-aloop device is on playback side, the required sync mode is
PLAYSHIFT. That means Loopback ctl elem "PCM Rate Shift 100000" of the
corresponding capture side of the Loopback pipe must be controlled (by
pitch reciprocal).
ASCII name of the playback rate shift ctl elem is specified with newly
added option -x/--prateshift, e.g.:
-P hw:Loopback,0 -S playshift \
-x iface=PCM,name='PCM Rate Shift 100000',device=1
Signed-off-by: Pavel Hofman <pavel.hofman@xxxxxxxxxxx>
---
alsaloop/alsaloop.1 | 11 ++++--
alsaloop/alsaloop.c | 11 +++++-
alsaloop/alsaloop.h | 1 +
alsaloop/pcmjob.c | 83 ++++++++++++++++++++++++++++++++++-----------
4 files changed, 83 insertions(+), 23 deletions(-)
diff --git a/alsaloop/alsaloop.1 b/alsaloop/alsaloop.1
index 6bacfd5..006494d 100644
--- a/alsaloop/alsaloop.1
+++ b/alsaloop/alsaloop.1
@@ -57,6 +57,11 @@ Use given CTL device for playback.
Use given CTL device for capture.
+.TP
+\fI\-x <ctl_ascii_name>\fP | \fI\-\-prateshift=<ctl_ascii_name>\fP
+
+Specify ctl ascii name for playshift sync mode (see the Examples section).
+
.TP
\fI\-l <latency>\fP | \fI\-\-latency=<frames>\fP
@@ -195,10 +200,12 @@ Verbose xrun profiling.
Set process wake timeout.
.SH EXAMPLES
-
-.TP
+.nf
\fBalsaloop \-C hw:0,0 \-P hw:1,0 \-t 50000\fR
+\fBalsaloop \-C hw:soundcard,0 \-P hw:Loopback,0 \-t 50000 \-S playshift \\
+\-x iface=PCM,name='PCM Rate Shift 100000',device=1\fR
+.ne
.SH BUGS
None known.
.SH AUTHOR
diff --git a/alsaloop/alsaloop.c b/alsaloop/alsaloop.c
index 06ffadf..4192712 100644
--- a/alsaloop/alsaloop.c
+++ b/alsaloop/alsaloop.c
@@ -175,6 +175,7 @@ void help(void)
"-C,--cdevice capture device\n"
"-X,--pctl playback ctl device\n"
"-Y,--cctl capture ctl device\n"
+"-x,--prateshift playback 'PCM Rate Shift 100000' ascii ctl name\n"
"-l,--latency requested latency in frames\n"
"-t,--tlatency requested latency in usec (1/1000000sec)\n"
"-f,--format sample format\n"
@@ -362,6 +363,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
{"cdevice", 1, NULL, 'C'},
{"pctl", 1, NULL, 'X'},
{"cctl", 1, NULL, 'Y'},
+ {"prateshift", 1, NULL, 'x'},
{"latency", 1, NULL, 'l'},
{"tlatency", 1, NULL, 't'},
{"format", 1, NULL, 'f'},
@@ -391,6 +393,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
char *arg_cdevice = NULL;
char *arg_pctl = NULL;
char *arg_cctl = NULL;
+ char *arg_prateshift = NULL;
unsigned int arg_latency_req = 0;
unsigned int arg_latency_reqtime = 10000;
snd_pcm_format_t arg_format = SND_PCM_FORMAT_S16_LE;
@@ -420,7 +423,7 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
while (1) {
int c;
if ((c = getopt_long(argc, argv,
- "hdg:P:C:X:Y:l:t:F:f:c:r:s:benvA:S:a:m:T:O:w:UW:z",
+ "hdg:P:C:X:Y:x:l:t:F:f:c:r:s:benvA:S:a:m:T:O:w:UW:z",
long_option, NULL)) < 0)
break;
switch (c) {
@@ -446,6 +449,9 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
case 'Y':
arg_cctl = strdup(optarg);
break;
+ case 'x':
+ arg_prateshift = strdup(optarg);
+ break;
case 'l':
err = atoi(optarg);
arg_latency_req = err >= 4 ? err : 4;
@@ -627,6 +633,9 @@ static int parse_config(int argc, char *argv[], snd_output_t *output,
logit(LOG_CRIT, "Unable to add ossmixer controls.\n");
exit(EXIT_FAILURE);
}
+ if (arg_prateshift)
+ play->prateshift_name = arg_prateshift;
+
#ifdef USE_SAMPLERATE
loop->src_enable = arg_samplerate > 0;
if (loop->src_enable)
diff --git a/alsaloop/alsaloop.h b/alsaloop/alsaloop.h
index 1dbcefe..7a98ef3 100644
--- a/alsaloop/alsaloop.h
+++ b/alsaloop/alsaloop.h
@@ -127,6 +127,7 @@ struct loopback_handle {
snd_ctl_elem_value_t *ctl_format;
snd_ctl_elem_value_t *ctl_rate;
snd_ctl_elem_value_t *ctl_channels;
+ char *prateshift_name; /* ascii name for the playback rate shift ctl elem */
};
struct loopback {
diff --git a/alsaloop/pcmjob.c b/alsaloop/pcmjob.c
index 845ab82..8658fa6 100644
--- a/alsaloop/pcmjob.c
+++ b/alsaloop/pcmjob.c
@@ -1101,7 +1101,8 @@ void update_pitch(struct loopback *loop)
#endif
}
else if (loop->sync == SYNC_TYPE_PLAYRATESHIFT) {
- set_rate_shift(loop->play, pitch);
+ // pitch is capture-based, playback side requires reciprocal
+ set_rate_shift(loop->play, 1 / pitch);
#ifdef USE_SAMPLERATE
if (loop->use_samplerate) {
loop->src_data.src_ratio =
@@ -1172,44 +1173,86 @@ static int get_channels(struct loopback_handle *lhandle)
return snd_ctl_elem_value_get_integer(lhandle->ctl_channels, 0);
}
-static void openctl_elem(struct loopback_handle *lhandle,
- int device, int subdevice,
- const char *name,
- snd_ctl_elem_value_t **elem)
+static int openctl_elem_id(struct loopback_handle *lhandle, snd_ctl_elem_id_t *id,
+ snd_ctl_elem_value_t **elem)
{
int err;
if (snd_ctl_elem_value_malloc(elem) < 0) {
*elem = NULL;
+ snd_ctl_elem_id_free(id);
+ return -ENOMEM;
+ }
+ snd_ctl_elem_value_set_id(*elem, id);
+ snd_ctl_elem_value_set_interface(*elem, SND_CTL_ELEM_IFACE_PCM);
+ err = snd_ctl_elem_read(lhandle->ctl, *elem);
+ if (err < 0) {
+ snd_ctl_elem_id_free(id);
+ snd_ctl_elem_value_free(*elem);
+ *elem = NULL;
+ return err;
} else {
- snd_ctl_elem_value_set_interface(*elem,
- SND_CTL_ELEM_IFACE_PCM);
- snd_ctl_elem_value_set_device(*elem, device);
- snd_ctl_elem_value_set_subdevice(*elem, subdevice);
- snd_ctl_elem_value_set_name(*elem, name);
- err = snd_ctl_elem_read(lhandle->ctl, *elem);
- if (err < 0) {
- snd_ctl_elem_value_free(*elem);
- *elem = NULL;
- } else {
- if (verbose)
- snd_output_printf(lhandle->loopback->output,
- "Opened PCM element %s of %s, device %d, subdevice %d\n",
- name, snd_ctl_name(lhandle->ctl), device, subdevice);
- }
+ snd_output_printf(lhandle->loopback->output,
+ "Opened PCM element %s of %s, device %d, subdevice %d\n",
+ snd_ctl_elem_id_get_name(id), snd_ctl_name(lhandle->ctl),
+ snd_ctl_elem_id_get_device(id),
+ snd_ctl_elem_id_get_subdevice(id));
+ return 0;
}
}
+static int openctl_elem(struct loopback_handle *lhandle,
+ int device, int subdevice,
+ const char *name,
+ snd_ctl_elem_value_t **elem)
+{
+ snd_ctl_elem_id_t *id;
+
+ if (snd_ctl_elem_id_malloc(&id))
+ return -ENOMEM;
+ snd_ctl_elem_id_set_device(id, device);
+ snd_ctl_elem_id_set_subdevice(id, subdevice);
+ snd_ctl_elem_id_set_name(id, name);
+ return openctl_elem_id(lhandle, id, elem);
+}
+
+static int openctl_elem_ascii(struct loopback_handle *lhandle, char *ascii_name,
+ snd_ctl_elem_value_t **elem)
+{
+ snd_ctl_elem_id_t *id;
+
+ if (snd_ctl_elem_id_malloc(&id)) {
+ return -ENOMEM;
+ }
+ if (snd_ctl_ascii_elem_id_parse(id, ascii_name)) {
+ snd_ctl_elem_id_free(id);
+ fprintf(stderr, "Wrong control identifier: %s\n", ascii_name);
+ return -EINVAL;
+ }
+ return openctl_elem_id(lhandle, id, elem);
+}
+
static int openctl(struct loopback_handle *lhandle, int device, int subdevice)
{
int err;
lhandle->ctl_rate_shift = NULL;
if (lhandle->loopback->play == lhandle) {
+ // play only
+ if (lhandle->prateshift_name) {
+ err = openctl_elem_ascii(lhandle, lhandle->prateshift_name,
+ &lhandle->ctl_rate_shift);
+ if (err < 0) {
+ logit(LOG_CRIT, "Unable to open playback PCM Rate Shift elem '%s'.\n",
+ lhandle->prateshift_name);
+ exit(EXIT_FAILURE);
+ }
+ }
if (lhandle->loopback->controls)
goto __events;
return 0;
}
+ // capture only
openctl_elem(lhandle, device, subdevice, "PCM Notify",
&lhandle->ctl_notify);
openctl_elem(lhandle, device, subdevice, "PCM Rate Shift 100000",
--
2.25.1
