[PATCH 1/3] ASoC: SOF: topology: show clks_control value in dynamic debug

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We log most of the SSP configurations except the clks_control. This
will be used to enable bclk/mclk early start so it's useful to show
the information to the user.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
Reviewed-by: Bard Liao <bard.liao@xxxxxxxxx>
Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
---
 sound/soc/sof/topology.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sof/topology.c b/sound/soc/sof/topology.c
index 43bd2f18c1c2..bd0d82b91465 100644
--- a/sound/soc/sof/topology.c
+++ b/sound/soc/sof/topology.c
@@ -2827,12 +2827,12 @@ static int sof_link_ssp_load(struct snd_soc_component *scomp, int index,
 		config[i].ssp.rx_slots = le32_to_cpu(hw_config[i].rx_slots);
 		config[i].ssp.tx_slots = le32_to_cpu(hw_config[i].tx_slots);
 
-		dev_dbg(scomp->dev, "tplg: config SSP%d fmt 0x%x mclk %d bclk %d fclk %d width (%d)%d slots %d mclk id %d quirks %d\n",
+		dev_dbg(scomp->dev, "tplg: config SSP%d fmt %#x mclk %d bclk %d fclk %d width (%d)%d slots %d mclk id %d quirks %d clks_control %#x\n",
 			config[i].dai_index, config[i].format,
 			config[i].ssp.mclk_rate, config[i].ssp.bclk_rate,
 			config[i].ssp.fsync_rate, config[i].ssp.sample_valid_bits,
 			config[i].ssp.tdm_slot_width, config[i].ssp.tdm_slots,
-			config[i].ssp.mclk_id, config[i].ssp.quirks);
+			config[i].ssp.mclk_id, config[i].ssp.quirks, config[i].ssp.clks_control);
 
 		/* validate SSP fsync rate and channel count */
 		if (config[i].ssp.fsync_rate < 8000 || config[i].ssp.fsync_rate > 192000) {
-- 
2.25.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux