> On 3 Oct 2021, at 9:13 am, Geraldo Nascimento <geraldogabriel@xxxxxxxxx> wrote: > > On Sun, Oct 03, 2021 at 01:43:12AM +0200, Martin Blumenstingl wrote: >> Hello Jerome et al., >> >> on Amlogic Meson SoCs which use the AIU audio controller we have the >> so-called "machine gun noise" (MGN) issue, reproducible for example in >> Kodi. So far nobody was able to identify the cause of this issue. My >> idea was to at least narrow down the issue so we can categorize it. For >> that I wanted to get the SPDIF output from AIU to the HDMI controller >> working. >> > > Hi, Martin, > > The MGN issue surely must be that one when using ALSA directly > (no dmix, no JACK, no Pulseaudio, no Pipewire, no nothing) and > when the track changes or we pause it, when it resumes we get > noise instead of sound, correct? > > If so, thanks for trying to track this down! > > I bring it up because Googling it seems to head straight to a > Neil Armstrong post to linux-amlogic about what works and what > doesn't on linux-meson currently, and only if you dig deeper > you find a couple of reports apparently by the same person > about the "machine gun noise" thing. > > It doesn't sound like a machine gun noise to me :) > > More like brown noise, but anyway what I'd like to note to > everyone involved is that this one is a major dealbreaker. > Unless using JACK, Pulseaudio, Pipewire (?) or at least dmix > audio will degrade at the second song or when the user first > pauses and then resumes a stream, completely ruining the > experience. I’m the origin of most reports that Google will eventually discover. I was told elsewhere that this is known as MGN so I’ve described it as such, but that could be wrong. For clarity this is the noise (triggered, and with AVR volume deliberately right down) followed by some navigation in the Kodi GUI to change output: https://chewitt.libreelec.tv/testing/wp2_audio_noise.mov In the LibreELEC images I work on where this occurs it’s not something I associate with play/pause (although I can’t definitively rule it out) or second or third songs (not something that happens that often or predictably) but more when there’s a hard transition like starting or stopping playback. I hit it most with simple scrolling around in the Kodi GUI, although that could be because (due to this issue) I limit media playback testing on AIU devices. It’s particularly simple to trigger from the Kodi Settings > System > Audio page, just scroll around it for 10-30 seconds, which is handy because the only way to stop the noise is switching audio source (from anything to anything) on the same page. CH. >> On Amlogic Meson GXBB/GXL/GXM SoCs a DesignWare HDMI TX controller is >> used. This has an SPDIF input but there's currently not driver for it. >> On Meson8/8b/8m2 SoCs I am working on a HDMI driver for the TransSwitch >> HDMI controller which - just like DesignWare HDMI TX - supports SPDIF >> and I2S inputs. >> I decided to add SPDIF support to the latter since the code from the >> vendor driver is much easier. >> >> It took me a while to figure out why I would not get any audio output >> from AIU SPDIF to the HDMI controller - or from there to the sink. >> The "fix" for this issue is the RFC patch which is part of this series. >> Any feedback would be great as I am still new to the ASoC subsystem. >> >> Another part I am still struggling with is the audio "routing" (due to >> lack of a better term - please correct me if this is not the right word >> to use for this case). I have the following description in my .dts: >> sound { >> compatible = "amlogic,gx-sound-card"; >> model = "M8B-ODROID-C1"; >> >> assigned-clocks = <&clkc CLKID_MPLL0>, >> <&clkc CLKID_MPLL1>; >> assigned-clock-rates = <294912000>, >> <270950400>; >> dai-link-0 { >> sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; >> }; >> >> dai-link-1 { >> sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; >> }; >> >> dai-link-2 { >> sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; >> dai-format = "i2s"; >> mclk-fs = <256>; >> >> codec-0 { >> sound-dai = <&aiu AIU_HDMI CTRL_I2S>; >> }; >> }; >> >> dai-link-3 { >> sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; >> >> codec-0 { >> sound-dai = <&aiu AIU_HDMI CTRL_PCM>; >> }; >> }; >> >> dai-link-4 { >> sound-dai = <&aiu AIU_HDMI CTRL_OUT>; >> >> codec-0 { >> sound-dai = <&hdmi_tx>; >> }; >> }; >> }; >> The driver for &hdmi_tx defines: >> struct hdmi_codec_pdata pdata = { >> .ops = &txc_48352_hdmi_codec_ops, >> .i2s = 1, >> .spdif = 1, >> .max_i2s_channels = 8, >> .data = priv, >> }; >> In hdmi_codec_ops.hw_params I always get fmt->fmt HDMI_I2S unless I >> remove all I2S references from the .dts snipped above (only then >> HDMI_SPDIF is detected). Based on the selection of the "HDMI Source" >> enum in aiu-codec-ctrl I was expecting the format to update as well. >> That unfortunately doesn't happen and I don't know how that can be >> achieved. >> > > Hm, that sounds weird. I hope you get the answers you are looking for. > > Thanks, > Geraldo Nascimento > >> >> Best regards, >> Martin >> >> >> Martin Blumenstingl (1): >> ASoC: meson: aiu: Fix HDMI codec control selection >> >> sound/soc/meson/aiu-codec-ctrl.c | 108 ++++++++++++++++++++++-------- >> sound/soc/meson/aiu-encoder-i2s.c | 6 -- >> 2 files changed, 80 insertions(+), 34 deletions(-) >> >> -- >> 2.33.0 >> >
