[PATCH 2/4] ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
 sound/soc/codecs/nau8824.c | 40 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c
index f946ef65a4c1..f7018f2dd21f 100644
--- a/sound/soc/codecs/nau8824.c
+++ b/sound/soc/codecs/nau8824.c
@@ -8,6 +8,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
@@ -27,6 +28,12 @@
 
 #include "nau8824.h"
 
+#define NAU8824_JD_ACTIVE_HIGH			BIT(0)
+
+static int nau8824_quirk;
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, uint, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
 
 static int nau8824_config_sysclk(struct nau8824 *nau8824,
 	int clk_id, unsigned int freq);
@@ -1845,6 +1852,34 @@ static int nau8824_read_device_properties(struct device *dev,
 	return 0;
 }
 
+/* Please keep this list alphabetically sorted */
+static const struct dmi_system_id nau8824_quirk_table[] = {
+	{
+		/* Cyberbook T116 rugged tablet */
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Default string"),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "20170531"),
+		},
+		.driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH),
+	},
+	{}
+};
+
+static void nau8824_check_quirks(void)
+{
+	const struct dmi_system_id *dmi_id;
+
+	if (quirk_override != -1) {
+		nau8824_quirk = quirk_override;
+		return;
+	}
+
+	dmi_id = dmi_first_match(nau8824_quirk_table);
+	if (dmi_id)
+		nau8824_quirk = (unsigned long)dmi_id->driver_data;
+}
+
 static int nau8824_i2c_probe(struct i2c_client *i2c,
 	const struct i2c_device_id *id)
 {
@@ -1869,6 +1904,11 @@ static int nau8824_i2c_probe(struct i2c_client *i2c,
 	nau8824->irq = i2c->irq;
 	sema_init(&nau8824->jd_sem, 1);
 
+	nau8824_check_quirks();
+
+	if (nau8824_quirk & NAU8824_JD_ACTIVE_HIGH)
+		nau8824->jkdet_polarity = 0;
+
 	nau8824_print_device_properties(nau8824);
 
 	ret = regmap_read(nau8824->regmap, NAU8824_REG_I2C_DEVICE_ID, &value);
-- 
2.31.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux