At Thu, 13 Mar 2008 20:18:34 +0100,
Pavel Hofman wrote:
>
> Takashi Iwai wrote:
> > At Thu, 13 Mar 2008 13:49:20 +0100,
> > Pavel Hofman wrote:
> >> Takashi Iwai napsal(a):
> >>> At Wed, 12 Mar 2008 23:50:08 +0100,
> >>> Pavel Hofman wrote:
> >>>> Hi,
> >>>>
> >>>> here is my scenario:
> >>>>
> >>>> ICE1724 card, trying to record from SPDIF input via AK4114, ICE1724
> >>>> slaved to SPDIF clock from the receiver.
> >>>>
> >>>> The card detects SPDIF input rate correctly (in my case ESI Juli where
> >>>> AK4114 is provided with independent clock signal to enable the rate
> >>>> detection). Let's say it is 192000.
> >>>>
> >>>> Now I want to arecord the input stream, let's say in CD quality, using
> >>>> the plug plugin. The command fails, because of the check in ak4114.c:
> >>>>
> >>>> res = external_rate(rcs1);
> >>>> if (!(flags & AK4114_CHECK_NO_RATE) && runtime && runtime->rate != res) {
> >>>> snd_pcm_stream_lock_irqsave(ak4114->capture_substream, _flags);
> >>>> if (snd_pcm_running(ak4114->capture_substream)) {
> >>>> printk(KERN_DEBUG "rate changed (%i <- %i)\n", runtime->rate, res);
> >>>> snd_pcm_stop(ak4114->capture_substream, SNDRV_PCM_STATE_DRAINING);
> >>>> res = 1;
> >>>> }
> >>>> snd_pcm_stream_unlock_irqrestore(ak4114->capture_substream, _flags);
> >>>> }
> >>>>
> >>>> The stream gets stopped because res = 192000 and runtime->rate = 44100.
> >>>>
> >>>> The problem is that the capture device still offers all the available
> >>>> rates, instead of the single SPDIF input one. Thus, the plug plugin is
> >>>> not forced to convert from 192000 to 44100 and runtime->rate is 44100
> >>>> instead of 192000.
> >>>>
> >>>> Of course recording at 192000 works fine.
> >>>>
> >>>> What would be the best way to force the SPDIF capture device to offer
> >>>> (advertise) only the current rate? This functionality would have to be
> >>>> applicable only to the few cards correctly detecting incoming rate
> >>>> (unlike most ice1724 cards without independent clock in slave mode).
> >>> What about to call snd_ak4114_check_rate_and_errors() at PCM open?
> >>> You can pass AK4114_CHECK_NO_RATE to flags argument to skip the check
> >>> there, at least.
> >>>
> >>>
> >> Well, I would not want to skip the check for cards with functioning rate
> >> detection. Plus snd_ak4114_check_rate_and_errors gets called
> >> periodically afterwards.
> >
> > Yes, but the check there is simply useless at open. It's only for
> > running states. snd_ak4114_external_rate() would be simler, then.
> >
> >> It would be great if the driver in slaved-clock mode cut its list of
> >> native sample rates to the only one currently fed to SPDIF input and
> >> detected by AK4114. A routine doing this would be called when switching
> >> clock to the slaved-clock mode and called again in
> >> snd_ak4114_check_rate_and_errors() when any change in input rate is
> >> detected (and the stream is not running). Going back to master-clock
> >> mode would restore the existing list of all the rates.
> >>
> >> In case of input sample rate change when the PCM stream is running, the
> >> stream would be stopped. This is already implemented in the current
> >> version of snd_ak4114_check_rate_and_errors()
> >>
> >> Unfortunately, I do not know how to change the rates list properly not
> >> to break something. If it is only about changing the HW params struct,
> >> that would be trivial.
> >
> > Suppose that the slave <-> master mode change doesn't happen during
> > the stream is opened, it's relatively easy. So far, ice1724.c doesn't
> > call spdif.ops.open/close callbacks. Call them in *_spdif_open/close
> > functions with NULL check. Then add open hook in juli.c so that you
> > can change rates_min and rates_max to the currently detected rate at
> > open...
> >
> > Well, it's faster to write a patch than texts.
> >
> >
>
>
> .......
>
> Takashi, thanks for the patch, it works flawlessly.
OK, now committed to HG tree.
> Another issue - when the external clock changes rate and the stream is
> running (typically when starting the source playback which switches the
> source card (and its SPDIF-OUT) to a different frequency), the target
> card detects the change and the capture stream is stopped in
> snd_ak4114_check_rate_and_errors() by
>
> snd_pcm_stop(ak4114->capture_substream, SNDRV_PCM_STATE_DRAINING);
>
> How should recording applications behave with stream in this mode? I
> would expect arecord to close, but it does nothing. Is this correct
> behaviour?
It's supposed to be drained then stopped. Maybe something wrong in
the handling of DRAINING state in the capture direction.
Anyway, it's a bit strange situation as is. Since the sample rate is
changed, you can't call simply prepare again like normal errors...
Takashi
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
