> On 9/8/21 8:39 AM, Chiang, Mac wrote:
> >> Fixed Bard's address.
> >>
> >> Quik summary: there are multiple issues below with rather unclear
> >> handling of two separate configurations.
> > There are 3 hw boards support, I summarize as below:
> > 1. SSP2 connects 98390, with 2 speakers.
> > 2. SSP1 connects 98390, with 2 speakers or 4 speakers.
> > Thanks Piere. Please review my comments if I misunderstand.
>
> Please clearly identify these configurations in the next revision, thanks!
Ok.
>
>
> >>> +int max_98390_spk_codec_init(struct snd_soc_pcm_runtime *rtd) {
> >>> + struct snd_soc_card *card = rtd->card;
> >>> + int ret;
> >>> +
> >>> + ret = snd_soc_dapm_new_controls(&card->dapm,
> >> max_98390_tt_dapm_widgets,
> >>> +
> >> ARRAY_SIZE(max_98390_tt_dapm_widgets));
> >>> + if (ret) {
> >>> + dev_err(rtd->dev, "unable to add dapm controls, ret %d\n",
> >> ret);
> >>> + /* Don't need to add routes if widget addition failed */
> >>> + return ret;
> >>> + }
> >>> +
> >>> + ret = snd_soc_add_card_controls(card, max_98390_tt_kcontrols,
> >>> +
> >> ARRAY_SIZE(max_98390_tt_kcontrols));
> >>> + if (ret) {
> >>> + dev_err(rtd->dev, "unable to add card controls, ret %d\n",
> >> ret);
> >>> + return ret;
> >>> + }
> >>> +
> >>> + ret = snd_soc_dapm_add_routes(&card->dapm,
> >> max_98373_dapm_routes,
> >>> +
> >> ARRAY_SIZE(max_98373_dapm_routes));
> >>> + if (ret) {
> >>> + dev_err(rtd->dev, "Speaker Left, Right map addition failed:
> >> %d\n", ret);
> >>> + return ret;
> >>> + }
> >>> +
> >>> + ret = snd_soc_dapm_add_routes(&card->dapm,
> >> max_98390_tt_dapm_routes,
> >>> +
> >> ARRAY_SIZE(max_98390_tt_dapm_routes));
> >>> + if (ret)
> >>> + dev_err(rtd->dev, "Tweeter Speaker Left, Right map addition
> >> failed:
> >>> +%d\n", ret);
> >>> +
> >>> + return ret;
> >>> +}
> >>> +EXPORT_SYMBOL_NS(max_98390_spk_codec_init,
> >>> +SND_SOC_INTEL_SOF_MAXIM_COMMON);
> >>
> >> again what happens if you don't have tweeters in the configuration?
> >> Why would you add DAPM routes to a non-existent codec?
> > Without tweeter quirk, it goes to apply max_98390_codec_conf from
> > max_98390_set_codec_conf() With tweeter quirk, it goes to apply
> > max_98390_4spk_codec_conf from max_98390_set_codec_conf()
>
> what I meant here is that you will add the max_98390_tt_dapm_routes even
> in the two speaker case. That doesn't seem right?
max_98390_tt_dapm_routes will be apply only when 4SPK quirk. In two speakers quirk. the .init reuse the max_98373_spk_codec_init, so it added the max_98373_dapm_routes "Left/Right Spk" alone.
