Add compatible for CUI Devices CMM-4030D-261-I2S-TR. Signed-off-by: Angelo Dureghello <angelo.dureghello@xxxxxxxxxxx> --- Documentation/devicetree/bindings/sound/ics43432.txt | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/ics43432.txt b/Documentation/devicetree/bindings/sound/ics43432.txt index b02e3a6c0fef..e6f05f2f6c4e 100644 --- a/Documentation/devicetree/bindings/sound/ics43432.txt +++ b/Documentation/devicetree/bindings/sound/ics43432.txt @@ -1,4 +1,4 @@ -Invensense ICS-43432 MEMS microphone with I2S output. +Invensense ICS-43432-compatible MEMS microphone with I2S output. There are no software configuration options for this device, indeed, the only host connection is the I2S interface. Apart from requirements on clock @@ -8,7 +8,9 @@ contain audio data. A hardware pin determines if the device outputs data on the left or right channel of the I2S frame. Required properties: - - compatible : Must be "invensense,ics43432" + - compatible: should be one of the following. + "invensense,ics43432": For the Invensense ICS43432 + "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR Example: -- 2.32.0
