Ok thank you folkert .
On Tue, 24 Aug, 2021, 1:46 AM folkert, <folkert@xxxxxxxxxxxxxx> wrote:
> p=0 is more correct I think
>
> this is application only
>
> On Tue, Aug 24, 2021 at 01:03:27AM +0530, sujith kumar reddy wrote:
> > Hi folkert,
> >
> > The above you suggested p=0 is working .
> > i tried like
> > if (p > bar_length || p < 0)
> > p = bar_length;
> > This is also working.
> >
> > Which is the perfect one we can use?
> > Is there any impact of p with driver data or this is just a
> > application calculated value.
> >
> > Thanks
> > Sujith
> >
> >
> > On Tue, Aug 24, 2021 at 12:39 AM folkert <folkert@xxxxxxxxxxxxxx> wrote:
> >
> > > :-)
> > >
> > > If this also doesn't work, then I give up.
> > >
> > > diff --git a/aplay/aplay.c b/aplay/aplay.c
> > > index cc51dcb..03a4f73 100644
> > > --- a/aplay/aplay.c
> > > +++ b/aplay/aplay.c
> > > @@ -1753,8 +1753,10 @@ static void print_vu_meter_stereo(int *perc, int
> > > *maxperc)
> > > for (c = 0; c < 2; c++) {
> > > int p = perc[c] * bar_length / 100;
> > > char tmp[4];
> > > - if (p > bar_length)
> > > - p = bar_length;
> > > + if (p >= bar_length)
> > > + p = bar_length - 1;
> > > + if (p < 0)
> > > + p = 0;
> > > if (c)
> > > memset(line + bar_length + 6 + 1, '#', p);
> > > else
> > >
> > > On Tue, Aug 24, 2021 at 12:36:05AM +0530, sujith kumar reddy wrote:
> > > > Hi Folkert,
> > > >
> > > > Tried with the above code.This is also getting p value negative.
> > > >
> > > > My point is p is negative it doesn't go to
> > > >
> > > > if (p >= bar_length)
> > > > p = bar_length - 1;
> > > > it is going to memset second argument p,that is negative so crashing.
> > > >
> > > >
> > > > logs:
> > > > localhost ~ # ./sujith/arecord -D hw:1,2 -f S32_LE -r 48000 -c 2
> 1.wav
> > > -V s
> > > > Sujith entry: main
> > > > Recording WAVE '1.wav' : Signed 32 bit Little Endian, Rate 48000 Hz,
> > > Stereo
> > > >
> > > > print_vu_meter_stereo sujith 35 ////////////////////////// c=0 case
> > > > print_vu_meter_stereo sujith* -9227433* /////////////////////c=1
> case p
> > > > value negative which is going to memset second argument.
> > > >
> > > > Thanks
> > > > Sujith
> > > >
> > > >
> > > >
> > > > On Tue, Aug 24, 2021 at 12:17 AM folkert <folkert@xxxxxxxxxxxxxx>
> wrote:
> > > >
> > > > > Ah same bug.
> > > > > Please try this.
> > > > > The idea is that in both cases the extra '-1' breaks it.
> > > > >
> > > > > diff --git a/aplay/aplay.c b/aplay/aplay.c
> > > > > index cc51dcb..47db7e7 100644
> > > > > --- a/aplay/aplay.c
> > > > > +++ b/aplay/aplay.c
> > > > > @@ -1753,8 +1753,8 @@ static void print_vu_meter_stereo(int *perc,
> int
> > > > > *maxperc)
> > > > > for (c = 0; c < 2; c++) {
> > > > > int p = perc[c] * bar_length / 100;
> > > > > char tmp[4];
> > > > > - if (p > bar_length)
> > > > > - p = bar_length;
> > > > > + if (p >= bar_length)
> > > > > + p = bar_length - 1;
> > > > > if (c)
> > > > > memset(line + bar_length + 6 + 1, '#', p);
> > > > > else
> > > > >
> > > > >
> > > > > On Tue, Aug 24, 2021 at 12:14:00AM +0530, sujith kumar reddy wrote:
> > > > > > Tried with the above code.This is also getting p value negative.
> > > > > >
> > > > > > snippet code:
> > > > > >
> > > > > > fprintf(stderr, _(" %s sujith %d \n"), __func__,p);
> > > > > > if (p > bar_length)
> > > > > > p = bar_length;
> > > > > > if (c)
> > > > > > memset(line + bar_length + 6 + 1, '#',
> p);
> > > > > > else
> > > > > > memset(line + bar_length - p - 1, '#',
> p);
> > > > > >
> > > > > >
> > > > > > logs....
> > > > > > // c=0 case
> > > > > >
> > > > > > print_vu_meter_stereo sujith 35 ///value of p is 35
> > > > > > c =1 case
> > > > > >
> > > > > > print_vu_meter_stereo sujith -9227433 ///value is negative//
> > > > > >
> > > > > > On Mon, Aug 23, 2021 at 10:33 PM folkert <folkert@xxxxxxxxxxxxxx
> >
> > > wrote:
> > > > > >
> > > > > > > > const int bar_length = 35;
> > > > > > > > char line[80];
> > > > > > > ...
> > > > > > > > if (p > bar_length)
> > > > > > > > p = bar_length;
> > > > > > > > if (c)
> > > > > > > > memset(line + bar_length + 6 + 1,
> '#',
> > > p);
> > > > > > > > ----------------//this is the line where it is crashing.here
> p
> > > value
> > > > > is
> > > > > > > > becoming negative at c=1.As we see if we change the p value
> to
> > > > > bar_length
> > > > > > > > it works fine ..As it is a player issue not a driver issue.
> > > > > > >
> > > > > > > This is puzzling.
> > > > > > > bar_length + 6 + 1 + p and thus 35 + 6 + 1 + 35 is max 77, that
> > > fits
> > > > > > > easlity in 80.
> > > > > > >
> > > > > > > But wait:
> > > > > > >
> > > > > > > line[bar_length - p - 1] = '+';
> > > > > > >
> > > > > > > p is max bar_length, so we would end up putting '+' in line[-1]
> > > > > > >
> > > > > > > Can you try this?
> > > > > > >
> > > > > > >
> > > > > > > diff --git a/aplay/aplay.c b/aplay/aplay.c
> > > > > > > index cc51dcb..9cfd52c 100644
> > > > > > > --- a/aplay/aplay.c
> > > > > > > +++ b/aplay/aplay.c
> > > > > > > @@ -1764,7 +1764,7 @@ static void print_vu_meter_stereo(int
> *perc,
> > > int
> > > > > > > *maxperc)
> > > > > > > p = bar_length;
> > > > > > > if (c)
> > > > > > > line[bar_length + 6 + 1 + p] = '+';
> > > > > > > - else
> > > > > > > + else if (p < bar_length)
> > > > > > > line[bar_length - p - 1] = '+';
> > > > > > > if (ABS(maxperc[c]) > 99)
> > > > > > > sprintf(tmp, "MAX");
> > > > > > >
> > > > >
> > >
> > >
> > > Folkert van Heusden
> > >
> > > --
> > > Multitail es una herramienta flexible que permite visualizar los "log
> > > file" y seguir la ejecución de comandos. Permite filtrar, añadir
> > > colores, combinar archivos, la visualización de diferencias (diff-
> > > view), etc. http://www.vanheusden.com/multitail/
> > > ----------------------------------------------------------------------
> > > Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
> > >
>
>
> Folkert van Heusden
>
> --
> Multitail es una herramienta flexible que permite visualizar los "log
> file" y seguir la ejecución de comandos. Permite filtrar, añadir
> colores, combinar archivos, la visualización de diferencias (diff-
> view), etc. http://www.vanheusden.com/multitail/
> ----------------------------------------------------------------------
> Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
>
