On Donnerstag, 19. August 2021 14:08:36 CEST Robin Murphy wrote: > On 2021-08-17 11:11, Nicolas Frattaroli wrote: > > + rockchip,trcm-sync: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: > > + Which lrck/bclk clocks each direction will sync to. You should use > > the + constants in <dt-bindings/sound/rockchip,i2s-tdm.h> > > + oneOf: > > + - const: 0 > > + description: > > + RK_TRCM_TXRX. Use both the TX and the RX clock for TX and RX. > > + - const: 1 > > + description: > > + RK_TRCM_TX. Use only the TX clock for TX and RX. > > + - const: 2 > > + description: > > + RK_TRCM_RX. Use only the RX clock for TX and RX. > > I wonder if that might make sense to have boolean properties to describe > the latter two cases (which would effectively be mutually-exclusive), > rather than a magic number? Or possibly even just make the respective > clocks optional, if this is something which would be done per-SoC rather > than per-board? > >From what I know from downstream vendor device trees, these are per board, not for the SoC as a whole. There are I2S/TDM controllers on the SoC which I think are hardwired to certain other IP blocks, such as I2S0 being connected to HDMI, but I2S1 can be routed outside of the SoC where these come into play I believe. As for making them boolean properties, I'd rather not. If I were to make it two mutually exclusive booleans, this would result in 4 possible states rather than 3, and require complexity to check it both in the schema and in the probe function. Like this, I can get away with a switch case that has a fallthrough, and a list of consts in the schema. > > + > > + "#sound-dai-cells": > > + const: 0 > > + > > + rockchip,no-dmaengine: > > + description: > > + If present, driver will not register a pcm dmaengine, only the dai. > > + If the dai is part of multi-dais, the property should be present. > > + type: boolean > > That sounds a lot more like a policy decision specific to the Linux > driver implementation, than something which really belongs in DT as a > description of the platform. I agree. Should I be refactoring this into a module parameter or something along those lines? I'm unsure of where this goes. > > > + > > + rockchip,playback-only: > > + description: Specify that the controller only has playback > > capability. > > + type: boolean > > + > > + rockchip,capture-only: > > + description: Specify that the controller only has capture capability. > > + type: boolean > > Could those be inferred from the compatible string, or are there cases > where you have multiple instances of the IP block in different > configurations within the same SoC? (Or if it's merely reflecting > whether the respective interface is actually wired up externally, could > that be inferred from the attached codec?) > > Robin. > They can't be inferred from the SoC because there are indeed multiple instances of this IP block in different configurations on the same SoC. The RK3566 and RK3568 have four in total, of two different categories, each being able to be configured for a different format (though the number of channels and available formats vary for the two categories, one group only supports I2S and PCM with two channels) The particular configuration may even vary per-board; an I2S/TDM controller may be connected to an external codec which does not support capture, whereas on another board it may be connected to one that does. As an example, if I understand it correctly, I2S3 on the RK3566 and RK3568 can do 2 channels RX and TX in I2S mode, but only 2 channels either RX or TX in PCM mode, but I'm unsure of the language in the (still not public) documentation I have. Regards, Nicolas Frattaroli
