Hi, I am having problems getting audio working on my computer: 00:1f.3 Audio device: Intel Corporation Device f1c8 I did an internet search that said that I would need 5.13 or later to have support for this device. openSUSE 15.3 kernel 5.3.18-59.19-default says: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC233: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 snd_hda_codec_realtek hdaudioC0D0: inputs: snd_hda_codec_realtek hdaudioC0D0: Mic=0x1a snd_hda_codec_realtek hdaudioC0D0: Mic=0x19 but produces no sound output. Kernel 5.13.10 or 5.14-rc6 say: calling azx_driver_init+0x0/0x20 @ 1 snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops) snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000 snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x200f0000 snd_hda_intel 0000:00:1f.3: Codec #2 probe error; disabling it... snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001 hdaudio hdaudioC0D0: no AFG or MFG node found snd_hda_intel 0000:00:1f.3: no codecs initialized and of course no sound output. Anyone have suggestions or has a fix for this already been posted? or maybe I am just doing something wrong? thanks. -- ~Randy