Re: [PATCH v2 0/6] ASoC: Intel/rt5640: Add support for HP Elite Pad 1000G2 jack-detect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/19/21 2:05 PM, Hans de Goede wrote:
> Changes in v2:
> - Rebase on asoc/for-next
> - New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2"
>   DAPM pin for the mic on the 2nd jack"
> - Addressed Pierre-Louis' comments about calling
>   acpi_dev_add_driver_gpios() twice

Thanks Hans, the code in patch6 looks much simpler now.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>

> 
> Original cover-letter:
> 
> The HP Elitepad 1000 G2 tablet has 2 headset jacks:
> 
> 1. on the dock which uses the output of the codecs built-in HP-amp +
> the standard IN2 input which is always used with the headset-jack.
> 
> 2. on the tablet itself, this uses the line-out of the codec + an external
> HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
> the headset-mic.
> 
> The codec's GPIO1 is also its only IRQ output pin, so this means that
> the codec's IRQ cannot be used on this tablet. Instead the jack-detect
> is connected directly to GPIOs on the main SoC. The dock has a helper
> chip which also detects if a headset-mic is present or not, so there
> are 2 GPIOs for the jack-detect status of the dock. The tablet jack
> uses a single GPIO which indicates if a jack is present or not.
> 
> Differentiating between between headphones vs a headset on the tablet jack
> is done by using the usual mic-bias over-current-detection mechanism.
> 
> Regards,
> 
> Hans
> 
> 
> Hans de Goede (6):
>   ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c
>     file
>   ASoC: rt5640: Delay requesting IRQ until the machine-drv calls
>     set_jack
>   ASoC: rt5640: Add optional hp_det_gpio parameter to
>     rt5640_detect_headset()
>   ASoC: rt5640: Add rt5640_set_ovcd_params() helper
>   ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for
>     the mic on the 2nd jack
>   ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2
>     jack-detect
> 
>  sound/soc/codecs/rt5640.c             | 136 ++++++++++++----------
>  sound/soc/codecs/rt5640.h             |   6 +
>  sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++-
>  3 files changed, 234 insertions(+), 66 deletions(-)
> 



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux