Delay requesting the IRQ until the machine-drv calls set_jack. The main reason for this is that the codec's IRQ is unused on some boards, in which case we really should not call request_irq at all. On some boards there is an IRQ listed at index 0 for the codec, but this is not connected to the codec, but rather is directly connected to the jack's jack-detect pin. These special setups will be handled by the machine-driver, but the machine driver can only request the IRQ if it is not first requested by the codec driver. Moving the request_irq to the set_jack callback (which will not get called in this case) avoids the codec-driver clobbering the IRQ. Moving the request_irq also removes the need to disable the IRQ immediately after requesting it, avoiding a small race (this could also have been fixed by using the new IRQF_NO_AUTOEN flag when requesting the IRQ). Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- sound/soc/codecs/rt5640.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index a425e6b1687d..d32e9d69231c 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -2373,7 +2373,7 @@ static void rt5640_disable_jack_detect(struct snd_soc_component *component) if (!rt5640->jack) return; - disable_irq(rt5640->irq); + free_irq(rt5640->irq, rt5640); rt5640_cancel_work(rt5640); if (rt5640->jack->status & SND_JACK_MICROPHONE) { @@ -2389,6 +2389,7 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component, struct snd_soc_jack *jack) { struct rt5640_priv *rt5640 = snd_soc_component_get_drvdata(component); + int ret; /* Select JD-source */ snd_soc_component_update_bits(component, RT5640_JD_CTRL, @@ -2446,7 +2447,17 @@ static void rt5640_enable_jack_detect(struct snd_soc_component *component, rt5640_enable_micbias1_ovcd_irq(component); } - enable_irq(rt5640->irq); + ret = request_irq(rt5640->irq, rt5640_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "rt5640", rt5640); + if (ret) { + dev_warn(component->dev, "Failed to reguest IRQ %d: %d\n", rt5640->irq, ret); + rt5640->irq = -ENXIO; + /* Undo above settings */ + rt5640_disable_jack_detect(component); + return; + } + /* sync initial jack state */ queue_work(system_long_wq, &rt5640->jack_work); } @@ -2836,18 +2847,6 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, if (ret) return ret; - ret = devm_request_irq(&i2c->dev, rt5640->irq, rt5640_irq, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING - | IRQF_ONESHOT, "rt5640", rt5640); - if (ret == 0) { - /* Gets re-enabled by rt5640_set_jack() */ - disable_irq(rt5640->irq); - } else { - dev_warn(&i2c->dev, "Failed to reguest IRQ %d: %d\n", - rt5640->irq, ret); - rt5640->irq = -ENXIO; - } - return devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5640, rt5640_dai, ARRAY_SIZE(rt5640_dai)); -- 2.31.1