> Can you describe 'bad values' in a little more detail.
You're right, some details are missing.
For example, for first control, a playback volume control, value can go from
0 to 63.
Before "store" command, I'd set it to 20.
I've check that in "/var/lib/alsa/asound/state", I had the same value. Here
is a part of this file :
state.codec {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 63'
iface MIXER
name 'HP Playback Volume'
value.0 20
value.1 20
}
So saved value seems ok.
After "restore" command, I get this :
$amixer cget numid=1
numid=1,iface=MIXER,name='HP Playback Volume'
; type=INTEGER,access=rw------,values=2,min=0,max=63,step=0
: values=45,45
That's why I say that values are not correct.
I'm currently using debian alsa-utils_1.0.16-1_arm package.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
