The DMAC on RZ/G2L has specific slave channel configuration parameters for SSI. This patch updates the dmas description and example node to include the encoded slave channel configuration. Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- Note:- This patch is based on [1] [1]:- https://patchwork.kernel.org/project/linux-renesas-soc/patch/20210806095322.2326-2-biju.das.jz@xxxxxxxxxxxxxx/ v4->v5: * Updated dmas description and removed fixes as it is an enhancement now. v3->v4: * Updated bindings as the DMAC driver on RZ/G2L expects the slave channel configuration to be passed in dmas property. v2->v3: * Merged the binding patch with dmas added * Updated dt binding example with encoded #dma-cells value. v1->v2: * Rebased on 5.14-rc2. --- .../bindings/sound/renesas,rz-ssi.yaml | 22 +++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml index 471937cb8d05..414ff8035a4e 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml @@ -48,6 +48,24 @@ properties: dmas: minItems: 1 maxItems: 2 + description: + The first cell represents a phandle to dmac + The second cell specifies the encoded MID/RID values of the SSI port + connected to the DMA client and the slave channel configuration + parameters. + bits[0:9] - Specifies MID/RID value of a SSI channel as below + MID/RID value of SSI rx0 = 0x256 + MID/RID value of SSI tx0 = 0x255 + MID/RID value of SSI rx1 = 0x25a + MID/RID value of SSI tx1 = 0x259 + MID/RID value of SSI rt2 = 0x25f + MID/RID value of SSI rx3 = 0x262 + MID/RID value of SSI tx3 = 0x261 + bit[10] - HIEN = 1, Detects a request in response to the rising edge + of the signal + bit[11] - LVL = 0, Detects based on the edge + bits[12:14] - AM = 2, Bus cycle mode + bit[15] - TM = 0, Single transfer mode dma-names: oneOf: @@ -93,8 +111,8 @@ examples: clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2"; power-domains = <&cpg>; resets = <&cpg R9A07G044_SSI0_RST_M2_REG>; - dmas = <&dmac 0x255>, - <&dmac 0x256>; + dmas = <&dmac 0x2655>, + <&dmac 0x2656>; dma-names = "tx", "rx"; #sound-dai-cells = <0>; }; -- 2.17.1
