Exposing the DMI L1 configuration as a kernel Kconfig option was in
hindsight a really bad idea. It led to several errors reported by
distributions which selected it by mistake.
The Kconfig is now replaced with a kernel parameter. Since DMI L1
entry is incompatible with pause on a capture stream, the latter is
disabled when the kernel parameter is set.
Experimental results show an increased residency in higher C states
and a significant decrease of system power consumption for "work from
home" usages such as VoIP calls.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@xxxxxxxxxxxxxxx>
Reviewed-by: Kai Vehmanen <kai.vehmanen@xxxxxxxxxxxxxxx>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
---
sound/soc/sof/intel/Kconfig | 10 ----------
sound/soc/sof/intel/hda-pcm.c | 17 ++++++++++++++---
2 files changed, 14 insertions(+), 13 deletions(-)
diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig
index ef8cf95b0edc..88b6176af021 100644
--- a/sound/soc/sof/intel/Kconfig
+++ b/sound/soc/sof/intel/Kconfig
@@ -249,16 +249,6 @@ config SND_SOC_SOF_HDA_PROBES
Say Y if you want to enable probes.
If unsure, select "N".
-config SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1
- bool "SOF Intel-HDA enable DMI Link L1"
- help
- This option enables DMI L1 for both playback and capture
- and disables known workarounds for specific HDAudio platforms.
- Only use to look into power optimizations on platforms not
- affected by DMI L1 issues. This option is not recommended.
- Say Y if you want to enable DMI Link L1.
- If unsure, select "N".
-
endif ## SND_SOC_SOF_HDA_COMMON
config SND_SOC_SOF_HDA_LINK_BASELINE
diff --git a/sound/soc/sof/intel/hda-pcm.c b/sound/soc/sof/intel/hda-pcm.c
index 59220fa1def1..cc8ddef37f37 100644
--- a/sound/soc/sof/intel/hda-pcm.c
+++ b/sound/soc/sof/intel/hda-pcm.c
@@ -15,6 +15,7 @@
* Hardware interface for generic Intel audio DSP HDA IP
*/
+#include <linux/moduleparam.h>
#include <sound/hda_register.h>
#include <sound/pcm_params.h>
#include "../sof-audio.h"
@@ -27,6 +28,10 @@
#define SDnFMT_BITS(x) ((x) << 4)
#define SDnFMT_CHAN(x) ((x) << 0)
+static bool hda_always_enable_dmi_l1;
+module_param_named(always_enable_dmi_l1, hda_always_enable_dmi_l1, bool, 0444);
+MODULE_PARM_DESC(always_enable_dmi_l1, "SOF HDA always enable DMI l1");
+
u32 hda_dsp_get_mult_div(struct snd_sof_dev *sdev, int rate)
{
switch (rate) {
@@ -216,6 +221,7 @@ int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
+ struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_component *scomp = sdev->component;
struct hdac_ext_stream *dsp_stream;
struct snd_sof_pcm *spcm;
@@ -228,9 +234,14 @@ int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
return -EINVAL;
}
- /* All playback and D0i3 compatible streams are DMI L1 capable */
- if (IS_ENABLED(CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1) ||
- direction == SNDRV_PCM_STREAM_PLAYBACK ||
+ /*
+ * All playback streams are DMI L1 capable, capture streams need
+ * pause push/release to be disabled
+ */
+ if (hda_always_enable_dmi_l1 && direction == SNDRV_PCM_STREAM_CAPTURE)
+ runtime->hw.info &= ~SNDRV_PCM_INFO_PAUSE;
+
+ if (hda_always_enable_dmi_l1 ||
spcm->stream[substream->stream].d0i3_compatible)
flags |= SOF_HDA_STREAM_DMI_L1_COMPATIBLE;
--
2.25.1
