Various bugfixes and improvements to the cs42l42 codec driver. Clocking bugfixes: - Remove any use of MCLK > 12.288 MHz because it isn't possible to switch between the low and high frequency ranges on-the-fly - Prevent the PLL configuration being written while the PLL is running - Correctly set the MCLK for the sample rate converters ASP bugfixes: - Ensure the TX (capture) ASP is properly configured when recording mono audio. Other bugfixes: - Prevent NULL pointer deref if there is an interrupt before soc component probe Code cleanup: - Remove the unused runtime suspend/resume functions. - Remove some code made redundant by an earlier patch Improvement: - Add ALSA control for HP path attenuation. Previously this was always set to -6dB with no way for the user to configure it. - Add ALSA control to disable the soft volume ramp at the start of audio. Richard Fitzgerald (12): ASoC: cs42l42: Use PLL for SCLK > 12.188MHz ASoC: cs42l42: Don't claim to support 192k ASoC: cs42l42: Always configure both ASP TX channels ASoC: cs42l42: Don't reconfigure the PLL while it is running ASoC: cs42l42: Set correct SRC MCLK ASoC: cs42l42: Mark OSC_SWITCH_STATUS register volatile ASoC: cs42l42: Allow time for HP/ADC to power-up after enable ASoC: cs42l42: Prevent NULL pointer deref in interrupt handler ASoC: cs42l42: Remove runtime_suspend/runtime_resume callbacks ASoC: cs42l42: Remove redundant pll_divout member ASoC: cs42l42: Add HP Volume Scale control ASoC: cs42l42: Add control for audio slow-start switch sound/soc/codecs/cs42l42.c | 281 ++++++++++++++++++++++++--------------------- sound/soc/codecs/cs42l42.h | 9 +- 2 files changed, 156 insertions(+), 134 deletions(-) -- 2.11.0