The HP Elitepad 1000 G2 has 2 headset jacks: 1. on the dock which uses the output of the codecs built-in HP-amp + the standard IN2 input which is always used with the headset-jack. 2. on the tablet itself, this uses the line-out of the codec, combined with an external HP-amp + IN1 for the headset-mic. Fix the HP ElitePad 1000 G2 to properly reflect this now that the machine-driver supports this setup. Note this also changes the mapping for the internal mic. from IN1 (which was pointing to the 2nd headset-jack mic) to DMIC2 which is the actual input for the internal mics. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415 Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- sound/soc/intel/boards/bytcr_rt5640.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index f67bd6caec36..d51bd22073df 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -644,8 +644,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"), }, - .driver_data = (void *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_DMIC2_MAP | + BYT_RT5640_MCLK_EN | + BYT_RT5640_LINEOUT | + BYT_RT5640_LINEOUT_AS_HP2 | + BYT_RT5640_HSMIC2_ON_IN1), }, { /* HP Pavilion x2 10-k0XX, 10-n0XX */ .matches = { -- 2.31.1
