The rate validation at the device probe is applied only to the specific devices (currently only for MOTU devices), and this check can be moved to quirk_flags gracefully, too. Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> --- sound/usb/format.c | 6 +----- sound/usb/quirks.c | 2 ++ sound/usb/usbaudio.h | 3 +++ 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/sound/usb/format.c b/sound/usb/format.c index eb216fef4ba7..50efccbffb8a 100644 --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -472,12 +472,8 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip, * behavior afterwards by some unknown reason. Do this only for the * known devices. */ - switch (USB_ID_VENDOR(chip->usb_id)) { - case 0x07fd: /* MOTU */ - break; - default: + if (!(chip->quirk_flags & QUIRK_FLAG_VALIDATE_RATES)) return 0; /* don't perform the validation as default */ - } table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL); if (!table) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index f47078209bcc..dc667b8c92f2 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1907,6 +1907,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = { QUIRK_FLAG_GET_SAMPLE_RATE | QUIRK_FLAG_CTL_MSG_DELAY), VENDOR_FLG(0x0644, /* TEAC Corp. */ QUIRK_FLAG_CTL_MSG_DELAY | QUIRK_FLAG_IFACE_DELAY), + VENDOR_FLG(0x07fd, /* MOTU */ + QUIRK_FLAG_VALIDATE_RATES), VENDOR_FLG(0x1de7, /* Phoenix Audio */ QUIRK_FLAG_GET_SAMPLE_RATE), VENDOR_FLG(0x23ba, /* Playback Design */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 57b5dcf211d4..ea0e3deb2a23 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -155,6 +155,8 @@ extern bool snd_usb_skip_validation; * Add a delay of 5-6ms at each control message handling * QUIRK_FLAG_IFACE_DELAY: * Add a delay of 50ms at each interface setup + * QUIRK_FLAG_VALIDATE_RATES: + * Perform sample rate validations at probe */ #define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0) @@ -169,5 +171,6 @@ extern bool snd_usb_skip_validation; #define QUIRK_FLAG_CTL_MSG_DELAY_1M (1U << 9) #define QUIRK_FLAG_CTL_MSG_DELAY_5M (1U << 10) #define QUIRK_FLAG_IFACE_DELAY (1U << 11) +#define QUIRK_FLAG_VALIDATE_RATES (1U << 12) #endif /* __USBAUDIO_H */ -- 2.26.2