From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 97 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared mclk
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_i2s_hw_params
snd_soc_dai_hw_params
soc_pcm_hw_params
snd_pcm_hw_params
snd_pcm_ioctl
...
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
---
sound/soc/cirrus/ep93xx-i2s.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/sound/soc/cirrus/ep93xx-i2s.c b/sound/soc/cirrus/ep93xx-i2s.c
index 0d26550d0df8..4d3179f03202 100644
--- a/sound/soc/cirrus/ep93xx-i2s.c
+++ b/sound/soc/cirrus/ep93xx-i2s.c
@@ -111,9 +111,9 @@ static void ep93xx_i2s_enable(struct ep93xx_i2s_info *info, int stream)
if ((ep93xx_i2s_read_reg(info, EP93XX_I2S_TX0EN) & 0x1) == 0 &&
(ep93xx_i2s_read_reg(info, EP93XX_I2S_RX0EN) & 0x1) == 0) {
/* Enable clocks */
- clk_enable(info->mclk);
- clk_enable(info->sclk);
- clk_enable(info->lrclk);
+ clk_prepare_enable(info->mclk);
+ clk_prepare_enable(info->sclk);
+ clk_prepare_enable(info->lrclk);
/* Enable i2s */
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 1);
@@ -156,9 +156,9 @@ static void ep93xx_i2s_disable(struct ep93xx_i2s_info *info, int stream)
ep93xx_i2s_write_reg(info, EP93XX_I2S_GLCTRL, 0);
/* Disable clocks */
- clk_disable(info->lrclk);
- clk_disable(info->sclk);
- clk_disable(info->mclk);
+ clk_disable_unprepare(info->lrclk);
+ clk_disable_unprepare(info->sclk);
+ clk_disable_unprepare(info->mclk);
}
}
--
2.26.2
