alsa-project/alsa-lib issue #163 was opened from markojurkovic: There seems to be an issue with ALSA and some onboard Realtek laptop audio chips, in my case Realtek ALC233 (but I've seen some reports online of people with other Realtek chips facing this issue). Namely, I've noticed that I cannot make use of all the sampling rates that the chip supports in GNU/Linux using ALSA. The chip supports up to 24-bit/192kHz analog stereo output, but in the three Linux distributions I've tried (Ubuntu, Fedora, Manjaro) I can only get either 44.1 or 48 kHz. The problem manifests itself by throwing the following error when attempting to play, for example, a 96kHz file in Audacious: "ALSA error: snd_pcm_hw_params_set_rate failed: Invalid argument." If I attempt to play such a file using PulseAudio, I am able to play the file, but it gets resampled to 48kHz (which I've verified by running "cat /proc/asound/card0/pcm0p/sub0/hw_params") In Windows, I can get up to 192kHz without problems using both WASAPI Exclusive and ASIO modes, meaning modes that directly communicate with hardware, just like ALSA. Following is the output of running "cat /proc/asound/card0/codec#0". This output indicates that the only supported sample rates for the sound card are 44100 and 48000, whereas this Realtek chip supports also 96000 and 192000. Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x44 0x44] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC233 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x00 0x00] Converter: stream=1, channel=0 PCM: rates [0x60]: 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Attached to this post is also the output of the alsa-info script. [alsa-debug.txt](https://github.com/alsa-project/alsa-lib/files/6797358/alsa-debug.txt) I tried different kernel versions, both generic and custom, on distros ranging from Ubuntu 19.04, Ubuntu 21.04, Pop OS 20.04 and 21.04, Fedora 32... Issue URL : https://github.com/alsa-project/alsa-lib/issues/163 Repository URL: https://github.com/alsa-project/alsa-lib