The intent of the status check on resume was to verify if a SoundWire peripheral reported ATTACHED before waiting for the initialization to complete. This is required to avoid timeouts that will happen with 'ghost' devices that are exposed in the platform firmware but are not populated in hardware. Unfortunately we used 'hw_init' instead of 'first_hw_init'. Due to another error, the resume operation never timed out, but the volume settings were not properly restored. BugLink: https://github.com/thesofproject/linux/issues/2908 BugLink: https://github.com/thesofproject/linux/issues/2637 Fixes: 7ad4d237e7c4a ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver') Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@xxxxxxxxxxxxxxx> Reviewed-by: Bard Liao <bard.liao@xxxxxxxxx> --- sound/soc/codecs/rt711-sdca-sdw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt711-sdca-sdw.c b/sound/soc/codecs/rt711-sdca-sdw.c index 9685c8905468..b84e64233d96 100644 --- a/sound/soc/codecs/rt711-sdca-sdw.c +++ b/sound/soc/codecs/rt711-sdca-sdw.c @@ -380,7 +380,7 @@ static int __maybe_unused rt711_sdca_dev_resume(struct device *dev) struct rt711_sdca_priv *rt711 = dev_get_drvdata(dev); unsigned long time; - if (!rt711->hw_init) + if (!rt711->first_hw_init) return 0; if (!slave->unattach_request) -- 2.25.1
