Currently only two interrupts supported is added in wcd934x interrupt controller,
however if we are adding more interrupts the file will become too much unreadable.
So add a macro to make adding new interrupts easy and also convert existing
slim and soundwire interrupts to use it.
This is in preparation to enable Multi Button Headset Control support on this
codec.
WCD934x supports Multi Button Headset control which enable headset detection
along with headset button detection.
This patch adds interrupts required for MBHC functionality.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
drivers/mfd/wcd934x.c | 43 +++++++++++++++++--------------------------
1 file changed, 17 insertions(+), 26 deletions(-)
diff --git a/drivers/mfd/wcd934x.c b/drivers/mfd/wcd934x.c
index c274d733b656..53d46fadcf5a 100644
--- a/drivers/mfd/wcd934x.c
+++ b/drivers/mfd/wcd934x.c
@@ -17,6 +17,21 @@
#include <linux/regulator/consumer.h>
#include <linux/slimbus.h>
+#define WCD934X_REGMAP_IRQ_REG(_irq, _off, _mask) \
+ [_irq] = { \
+ .reg_offset = (_off), \
+ .mask = (_mask), \
+ .type = { \
+ .type_reg_offset = (_off), \
+ .types_supported = IRQ_TYPE_EDGE_BOTH, \
+ .type_reg_mask = (_mask), \
+ .type_level_low_val = (_mask), \
+ .type_level_high_val = (_mask), \
+ .type_falling_val = 0, \
+ .type_rising_val = 0, \
+ }, \
+ }
+
static const struct mfd_cell wcd934x_devices[] = {
{
.name = "wcd934x-codec",
@@ -30,32 +45,8 @@ static const struct mfd_cell wcd934x_devices[] = {
};
static const struct regmap_irq wcd934x_irqs[] = {
- [WCD934X_IRQ_SLIMBUS] = {
- .reg_offset = 0,
- .mask = BIT(0),
- .type = {
- .type_reg_offset = 0,
- .types_supported = IRQ_TYPE_EDGE_BOTH,
- .type_reg_mask = BIT(0),
- .type_level_low_val = BIT(0),
- .type_level_high_val = BIT(0),
- .type_falling_val = 0,
- .type_rising_val = 0,
- },
- },
- [WCD934X_IRQ_SOUNDWIRE] = {
- .reg_offset = 2,
- .mask = BIT(4),
- .type = {
- .type_reg_offset = 2,
- .types_supported = IRQ_TYPE_EDGE_BOTH,
- .type_reg_mask = BIT(4),
- .type_level_low_val = BIT(4),
- .type_level_high_val = BIT(4),
- .type_falling_val = 0,
- .type_rising_val = 0,
- },
- },
+ WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_SLIMBUS, 0, BIT(0)),
+ WCD934X_REGMAP_IRQ_REG(WCD934X_IRQ_SOUNDWIRE, 2, BIT(4)),
};
static const struct regmap_irq_chip wcd934x_regmap_irq_chip = {
--
2.21.0
