From: Niklas Carlsson <niklasc@xxxxxxxx>
Configuring number of channels per LRCLK frame by using e.g.
snd_soc_dai_set_tdm_slot before configuring DAI format was being
overwritten by the latter due to a regmap_write which would write over
the whole register.
Signed-off-by: Niklas Carlsson <niklasc@xxxxxxxx>
---
sound/soc/codecs/adau17x1.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/adau17x1.c b/sound/soc/codecs/adau17x1.c
index 546ee8178038..8aae7ab74091 100644
--- a/sound/soc/codecs/adau17x1.c
+++ b/sound/soc/codecs/adau17x1.c
@@ -553,6 +553,7 @@ static int adau17x1_set_dai_fmt(struct snd_soc_dai *dai,
{
struct adau *adau = snd_soc_component_get_drvdata(dai->component);
unsigned int ctrl0, ctrl1;
+ unsigned int ctrl0_mask;
int lrclk_pol;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -612,8 +613,16 @@ static int adau17x1_set_dai_fmt(struct snd_soc_dai *dai,
if (lrclk_pol)
ctrl0 |= ADAU17X1_SERIAL_PORT0_LRCLK_POL;
- regmap_write(adau->regmap, ADAU17X1_SERIAL_PORT0, ctrl0);
- regmap_write(adau->regmap, ADAU17X1_SERIAL_PORT1, ctrl1);
+ /* Set the mask to update all relevant bits in ADAU17X1_SERIAL_PORT0 */
+ ctrl0_mask = ADAU17X1_SERIAL_PORT0_MASTER |
+ ADAU17X1_SERIAL_PORT0_LRCLK_POL |
+ ADAU17X1_SERIAL_PORT0_BCLK_POL |
+ ADAU17X1_SERIAL_PORT0_PULSE_MODE;
+
+ regmap_update_bits(adau->regmap, ADAU17X1_SERIAL_PORT0, ctrl0_mask,
+ ctrl0);
+ regmap_update_bits(adau->regmap, ADAU17X1_SERIAL_PORT1,
+ ADAU17X1_SERIAL_PORT1_DELAY_MASK, ctrl1);
adau->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
--
2.20.1
