Re: [v7 3/4] dt-bindings: Add Rockchip rk817 audio CODEC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Apr 20, 2021 at 09:56:35PM +0200, Johan Jonker wrote:
> Hi Chris,
> 
> Some comments. Have a look if they are useful.
> 
> On 4/20/21 6:07 PM, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan@xxxxxxxxxxx>
> > 
> > Create dt-binding documentation to document rk817 codec.
> > 
> > Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
> > ---
> > Changes in v7:
> >  - Removed ifdef around register definitions for MFD.
> >  - Replaced codec documentation with updates to MFD documentation.
> >  - Reordered elements in example to comply with upstream rules.
> >  - Added binding update back for Odroid Go Advance as requested.
> >  - Submitting patches from gmail now.
> > Changes in v6:
> >  - Included additional project maintainers for correct subsystems.
> >  - Removed unneeded compatible from DT documentation.
> >  - Removed binding update for Odroid Go Advance (will do in seperate series).
> > Changes in v5:
> >  - Move register definitions from rk817_codec.h to main rk808.h register
> >    definitions.
> >  - Add volatile register for codec bits.
> >  - Add default values for codec bits.
> >  - Removed of_compatible from mtd driver (not necessary).
> >  - Switched to using parent regmap instead of private regmap for codec.
> > Changes in v4:
> >  - Created set_pll() call.
> >  - Created user visible gain control in mic.
> >  - Check for return value of clk_prepare_enable().
> >  - Removed duplicate clk_prepare_enable().
> >  - Split DT documentation to separate commit.
> > Changes in v3:
> >  - Use DAPM macros to set audio path.
> >  - Updated devicetree binding (as every rk817 has this codec chip).
> >  - Changed documentation to yaml format.
> >  - Split MFD changes to separate commit.
> > Changes in v2:
> >  - Fixed audio path registers to solve some bugs.
> > 
> >  .../devicetree/bindings/mfd/rk808.txt         | 181 ++++++++++++++++++
> >  1 file changed, 181 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> > index 04df07f6f793..31eaabd2e179 100644
> > --- a/Documentation/devicetree/bindings/mfd/rk808.txt
> > +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> > @@ -63,6 +63,11 @@ Optional RK809 properties:
> >  - vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
> >  
> >  Optional RK817 properties:
> > +- clocks:	The input clock for the audio codec
> > +- clock-names:	The clock name for the codec clock. Should be "mclk".
> 
> #sound-dai-cells:
> 
> Needed for the interpretation of sound dais.
> Should be 0.

Will add, thank you.

> 
> Add empty line
> 
> > +- codec:	The child node for the codec to hold additional properties.
> 
> This is a nodename and not a property. Add below "vcc9-supply".
> 

Will change, thank you.

> > +- mic-in-differential: Telling if the microphone uses differential mode. Should
> > +		       be under the codec child node.
> 
> This goes in a subnode. Maybe add indent a bit?
> "mic-in-differential" is a property specific for Rockchip.
> 

I've moved it after the codec description to hopefully clarify that its
position.

> Ask rob+dt for exact name.
> Maybe this has to change to "rockchip,mic-in-differential"
> Update code as well!
> 

Will do.

> Add new added property names explicit in your commit message, so rob+dt
> can review more easy.
> 
> 
> >  - vcc8-supply:  The input supply for BOOST
> >  - vcc9-supply:  The input supply for OTG_SWITCH
> >  
> > @@ -275,3 +280,179 @@ Example:
> >  			};
> >  		};
> >  	};
> 
> Maybe add separator/title?
> 
> > +
> > +	rk817: pmic@20 {
> > +		compatible = "rockchip,rk817";
> > +		reg = <0x20>;
> 
> > +		interrupt-parent = <&gpio0>;
> 
> Missing in properties.
> 

This one was tricky; I honestly am not 100% sure but I think it's a required
property. I added it to the required properties as I see it used on every
implementation for this chip.

> > +		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> > +		clock-output-names = "rk808-clkout1", "xin32k";
> > +		clock-names = "mclk";
> > +		clocks = <&cru SCLK_I2S1_OUT>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
> 
> > +		wakeup-source;
> 
> Missing in properties.
> Is this common for all rkXXX?
> 

I don't think this is common for all, I believe it is optional for some. If I
am not mistaken this is because there is a button connected to the PMIC that
is used to wake/suspend/poweron/poweroff the device. I put it under optional
for now as I'm not sure if every device has this or not.

> > +		#clock-cells = <1>;
> 
> > +		#sound-dai-cells = <0>;
> 
> Missing in properties.

Will fix.

> 
> > +
> > +		vcc1-supply = <&vccsys>;
> > +		vcc2-supply = <&vccsys>;
> > +		vcc3-supply = <&vccsys>;
> > +		vcc4-supply = <&vccsys>;
> > +		vcc5-supply = <&vccsys>;
> > +		vcc6-supply = <&vccsys>;
> > +		vcc7-supply = <&vccsys>;
> > +
> > +		regulators {
> > +			vdd_logic: DCDC_REG1 {
> > +				regulator-name = "vdd_logic";
> > +				regulator-min-microvolt = <950000>;
> > +				regulator-max-microvolt = <1150000>;
> > +				regulator-ramp-delay = <6001>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <950000>;
> > +				};
> > +			};
> > +
> > +			vdd_arm: DCDC_REG2 {
> > +				regulator-name = "vdd_arm";
> > +				regulator-min-microvolt = <950000>;
> > +				regulator-max-microvolt = <1350000>;
> > +				regulator-ramp-delay = <6001>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +					regulator-suspend-microvolt = <950000>;
> > +				};
> > +			};
> > +
> > +			vcc_ddr: DCDC_REG3 {
> > +				regulator-name = "vcc_ddr";
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +				};
> > +			};
> > +
> > +			vcc_3v3: DCDC_REG4 {
> > +				regulator-name = "vcc_3v3";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_1v8: LDO_REG2 {
> > +				regulator-name = "vcc_1v8";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <1800000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <1800000>;
> > +				};
> > +			};
> > +
> > +			vdd_1v0: LDO_REG3 {
> > +				regulator-name = "vdd_1v0";
> > +				regulator-min-microvolt = <1000000>;
> > +				regulator-max-microvolt = <1000000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <1000000>;
> > +				};
> > +			};
> > +
> > +			vcc3v3_pmu: LDO_REG4 {
> > +				regulator-name = "vcc3v3_pmu";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vccio_sd: LDO_REG5 {
> > +				regulator-name = "vccio_sd";
> > +				regulator-min-microvolt = <1800000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-always-on;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_sd: LDO_REG6 {
> > +				regulator-name = "vcc_sd";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +				regulator-boot-on;
> > +
> > +				regulator-state-mem {
> > +					regulator-on-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_bl: LDO_REG7 {
> > +				regulator-name = "vcc_bl";
> > +				regulator-min-microvolt = <3300000>;
> > +				regulator-max-microvolt = <3300000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +					regulator-suspend-microvolt = <3300000>;
> > +				};
> > +			};
> > +
> > +			vcc_lcd: LDO_REG8 {
> > +				regulator-name = "vcc_lcd";
> > +				regulator-min-microvolt = <2800000>;
> > +				regulator-max-microvolt = <2800000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +					regulator-suspend-microvolt = <2800000>;
> > +				};
> > +			};
> > +
> > +			vcc_cam: LDO_REG9 {
> > +				regulator-name = "vcc_cam";
> > +				regulator-min-microvolt = <3000000>;
> > +				regulator-max-microvolt = <3000000>;
> > +
> > +				regulator-state-mem {
> > +					regulator-off-in-suspend;
> > +					regulator-suspend-microvolt = <3000000>;
> > +				};
> > +			};
> > +		};
> 
> Add empty line, like the rest.
> 

My mistake, will fix.

> > +		rk817_codec: codec {
> 
> > +			mic-in-differential;
> 
> See comment above.
> rockchip,mic-in-differential ??
> 
> > +		};
> > +	};
> > 
> 



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux