The Clock_Stop_Not_Finished bit is currently not cleared during the
clock stop sequence,which results in the clock stop sequence timing out
after 300ms. This is root-caused to a missing register configuration
impacting the transition between the bus clock and an internal clock.
This problem was exposed by cleanups in the SoundWire bus code,
where previously the ClockStopPrepare was mistakenly skipped
when using ClockStopMode0.
Signed-off-by: Jack Yu <jack.yu@xxxxxxxxxxx>
---
sound/soc/codecs/rt715-sdca-sdw.c | 1 +
sound/soc/codecs/rt715-sdca-sdw.h | 1 +
sound/soc/codecs/rt715-sdca.c | 3 +++
sound/soc/codecs/rt715-sdca.h | 1 +
4 files changed, 6 insertions(+)
diff --git a/sound/soc/codecs/rt715-sdca-sdw.c b/sound/soc/codecs/rt715-sdca-sdw.c
index 1350798406f0..47a8f04d7100 100644
--- a/sound/soc/codecs/rt715-sdca-sdw.c
+++ b/sound/soc/codecs/rt715-sdca-sdw.c
@@ -70,6 +70,7 @@ static bool rt715_sdca_mbq_readable_register(struct device *dev, unsigned int re
case 0x2000036:
case 0x2000037:
case 0x2000039:
+ case 0x2000044:
case 0x6100000:
return true;
default:
diff --git a/sound/soc/codecs/rt715-sdca-sdw.h b/sound/soc/codecs/rt715-sdca-sdw.h
index cd365bb60747..0cbc14844f8c 100644
--- a/sound/soc/codecs/rt715-sdca-sdw.h
+++ b/sound/soc/codecs/rt715-sdca-sdw.h
@@ -113,6 +113,7 @@ static const struct reg_default rt715_mbq_reg_defaults_sdca[] = {
{ 0x2000036, 0x0000 },
{ 0x2000037, 0x0000 },
{ 0x2000039, 0xaa81 },
+ { 0x2000044, 0x0202 },
{ 0x6100000, 0x0100 },
{ SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_FU_ADC8_9_VOL,
RT715_SDCA_FU_VOL_CTRL, CH_01), 0x00 },
diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
index 7db76c19e048..936e3061ca1e 100644
--- a/sound/soc/codecs/rt715-sdca.c
+++ b/sound/soc/codecs/rt715-sdca.c
@@ -1054,6 +1054,9 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
rt715_sdca_index_update_bits(rt715, RT715_VENDOR_REG,
RT715_REV_1, 0x40, 0x40);
}
+ /* DFLL Calibration trigger */
+ rt715_sdca_index_update_bits(rt715, RT715_VENDOR_REG,
+ RT715_DFLL_VAD, 0x1, 0x1);
/* trigger mode = VAD enable */
regmap_write(rt715->regmap,
SDW_SDCA_CTL(FUN_MIC_ARRAY, RT715_SDCA_SMPU_TRIG_ST_EN,
diff --git a/sound/soc/codecs/rt715-sdca.h b/sound/soc/codecs/rt715-sdca.h
index 85ce4d95e5eb..1c7fbff2ce1e 100644
--- a/sound/soc/codecs/rt715-sdca.h
+++ b/sound/soc/codecs/rt715-sdca.h
@@ -81,6 +81,7 @@ struct rt715_sdca_kcontrol_private {
#define RT715_AD_FUNC_EN 0x36
#define RT715_REV_1 0x37
#define RT715_SDW_INPUT_SEL 0x39
+#define RT715_DFLL_VAD 0x44
#define RT715_EXT_DMIC_CLK_CTRL2 0x54
/* Index (NID:61h) */
--
2.29.0
<<attachment: winmail.dat>>
