Using new kcontrols "Capture Switch" and "Capture Volume" instead,
remove kcontrols which no longer be used.
Is this going to disrupt any UCM profiles?
Yes (the rt715 prefix is from the SOF driver):
# RT715 specific volume control settings
BootSequence [
cset "name='rt715 DMIC3 Boost' 2"
cset "name='rt715 DMIC4 Boost' 2"
cset "name='rt715 ADC 24 Mux' 3"
cset "name='rt715 ADC 25 Mux' 4"
cset "name='rt715 ADC 27 Capture Switch' 1"
cset "name='rt715 ADC 07 Capture Switch' 1"
cset "name='rt715 ADC 07 Capture Volume' 58"
]
To be clearer, we wanted to change the UCM files to only try to
configure the 'old' controls when they are present. The 'new' controls
are aligned between RT715 and RT715-sdca.
There will be a minor inconvenience if an existing platform updates the
kernel without updating UCM files, but it's the only solution we found
in earlier discussions.
Distributions are typically faster with alsa-ucmconf updates than kernel
changes so that inconvenience is likely very limited (we support 4-5
Dell CML/TGL platforms w/ SoundWire)