On Sat, 13 Mar 2021 12:34:10 +0100, Vitaly Rodionov wrote: > @@ -1357,6 +1362,22 @@ static const struct hda_verb cs8409_cs42l42_init_verbs[] = { > { 0x47, AC_VERB_SET_PROC_COEF, 0x0080 }, /* I2C mode */ > { 0x47, AC_VERB_SET_COEF_INDEX, 0x005b }, /* Set I2C bus speed */ > { 0x47, AC_VERB_SET_PROC_COEF, 0x0200 }, /* 100kHz I2C_STO = 2 */ > + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0xF0 }, /* Widget node ASP-1-TX */ > + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x20 }, > + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x21 }, > + { 0x24, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x04 }, > + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0x50 }, /* Widget node ASP-1-RX0 */ > + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x20 }, > + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0xa1 }, > + { 0x34, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x04 }, > + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0xF0 }, /* Widget node ASP-2-TX */ > + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x00 }, > + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0x10 }, > + { 0x2C, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x90 }, > + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_0, 0x90 }, /* Widget node DMIC-1 */ > + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_1, 0x00 }, > + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_2, 0xA0 }, > + { 0x44, AC_VERB_SET_CONFIG_DEFAULT_BYTES_3, 0x90 }, Those widgets are all pin widgets, right? If so, setting via the pincfg table would be more suitable, as it's cached and exposed via sysfs for debugging. thanks, Takashi