On 07-02-08 00:58, Rene Herman wrote: > On 30-01-08 01:43, Rene Herman wrote: > >> 931 and 933 work and 930 (a non-PnP chip) is being a royal pain in the >> ass again. With the new code, I haven't yet been able to get it to >> work -- no IRQ is firing. However, I also experienced this _once_ with >> the old driver so I'm not sure what's going on. When I now try to >> reproduce with the old one, I can't. Maybe a timing difference. >> >> Will need further testing -- I have no time in the next few days. > > Hate it but will need to confirm that this is definitely a regression. OPTi > 82C930A does not work with the cs4231-lib using driver, does work with the > current driver. It loads, but gets no interrupts. > > However, relevant -- "does work with the old driver" is conditional on > one accepting a definition of "does work" which includes "does not > produce any sound". OPTi 930 is a Non-PnP chip, and it seems it might > need the same kind of internal switching that the Non-PnP sound galaxies > need before the output circuitry is actually connected to the WSS part > and not the SB part. (oh, by the way, that's not a hardware problem -- work fine under DOS) > Given that for most people sound cards have producing sound as one of > their more important characteristics it not in fact doing such no doubt > means that this chip isn't used at _all_ by anyone. I have one, but I > can't say I've ever found another one either. Could've sworn I tested it > before and got it to work but not able to say with certainty either. > > Massimo, do you remember if the driver was ever tested on a 930? > > In any case, it works on 931 and 933, not 930. 931/3 are the chips > actually used. No opinion on just integrating this anyway. Debugging 930 > is going to require some work and time. Rene. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
