The following ASoC codec drivers:
sound/soc/codecs/rt5659.c
sound/soc/codecs/rt5660.c
sound/soc/codecs/rt5665.c
sound/soc/codecs/rt5668.c
sound/soc/codecs/rt5670.c
sound/soc/codecs/rt5682.c
Use the following troublesome capture-volume-control names:
"IN1 Boost Volume"
"IN2 Boost Volume"
"IN3 Boost Volume"
"STO1 ADC Boost Gain Volume"
"STO2 ADC Boost Gain Volume"
"Mono ADC Boost Gain Volume"
And sound/soc/codecs/es8316.c uses "ADC PGA Gain Volume".
Note how these are suffixed with just " Volume" instead of
"Capture Volume". Add these to the exceptions table,
so that the type correctly gets set to CTL_CAPTURE_VOLUME instead
of CTL_GLOBAL_VOLUME.
This correctly makes snd_mixer_selem_has_capture_volume() return true for
these (and makes snd_mixer_selem_has_common_volume() return false).
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
src/mixer/simple_none.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/src/mixer/simple_none.c b/src/mixer/simple_none.c
index 8f964959..de81966f 100644
--- a/src/mixer/simple_none.c
+++ b/src/mixer/simple_none.c
@@ -920,8 +920,15 @@ static const struct excep {
*/
{"Input Source", 12, CTL_CAPTURE_ROUTE},
/* Avoid these Capture Volume/Switch controls getting seen as GLOBAL VOL/SW */
+ {"ADC PGA Gain Volume", 12, CTL_CAPTURE_VOLUME},
{"Capture Volume", 7, CTL_CAPTURE_VOLUME},
{"Capture Switch", 7, CTL_CAPTURE_SWITCH},
+ {"IN1 Boost Volume", 9, CTL_CAPTURE_VOLUME},
+ {"IN2 Boost Volume", 9, CTL_CAPTURE_VOLUME},
+ {"IN3 Boost Volume", 9, CTL_CAPTURE_VOLUME},
+ {"Mono ADC Boost Gain Volume", 19, CTL_CAPTURE_VOLUME},
+ {"STO1 ADC Boost Gain Volume", 19, CTL_CAPTURE_VOLUME},
+ {"STO2 ADC Boost Gain Volume", 19, CTL_CAPTURE_VOLUME},
/* Playback Volume/Switch controls without a " Playback ..." suffix */
{"3D Control - Depth", 18, CTL_PLAYBACK_VOLUME},
{"3D Control Sigmatel - Depth", 27, CTL_PLAYBACK_VOLUME},
--
2.30.1
