From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
The PLL is only needed for sclk < 11289600 Hz and cs42l42_pll_config()
will not configure it for higher rates. So it must only be enabled
when it is needed.
Signed-off-by: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/cs42l42.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 5755f8baddbcf..68b5a450623d3 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -855,8 +855,9 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
} else {
if (!cs42l42->stream_use) {
/* SCLK must be running before codec unmute */
- snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
- CS42L42_PLL_START_MASK, 1);
+ if ((cs42l42->bclk < 11289600) && (cs42l42->sclk < 11289600))
+ snd_soc_component_update_bits(component, CS42L42_PLL_CTL1,
+ CS42L42_PLL_START_MASK, 1);
/* Mark SCLK as present, turn off internal oscillator */
regmap_multi_reg_write(cs42l42->regmap, cs42l42_to_sclk_seq,
--
2.30.1
