[PATCH v2 0/3] soundwire: clear bus clash/parity interrupt before the mask is enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SoundWire specification allows a Slave device to report a bus clash
or parity error with the in-band interrupt mechanism.
Unfortunately, on some platforms, these errors are randomly reported and
don't seem to be valid.
This series suggests the addition of a Master level quirk to discard such
interrupts. The quirk should in theory have been added at the Slave level,
but since the problem was detected with different generations of Slave
devices it's hard to point to a specific IP. The problem might also be
board-dependent and hence dealing with a Master quirk is simpler.

v2:
 - Reorder the patches sequence.
 - Add comments about each quirk.
 - Use u64 quirks.


Bard Liao (3):
  soundwire: add master quirks for bus clash and parity
  soundwire: bus: handle master quirks for bus clash and parity
  soundwire: intel: add master quirks for bus clash and parity

 drivers/soundwire/bus.c       | 39 +++++++++++++++++++++++++++++++++++
 drivers/soundwire/intel.c     |  3 +++
 include/linux/soundwire/sdw.h | 22 ++++++++++++++++++++
 3 files changed, 64 insertions(+)

-- 
2.17.1




[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux